From: Conor Dooley <conor.dooley@xxxxxxxxxxxxx> This reverts commit 232ccac1bd9b5bfe73895f527c08623e7fa0752d. On the subject of suspend, the RISC-V SBI spec states: > Request the SBI implementation to put the calling hart in a platform > specific suspend (or low power) state specified by the suspend_type > parameter. The hart will automatically come out of suspended state and > resume normal execution when it receives an interrupt or platform > specific hardware event. This does not cover whether any given events actually reach the hart or not, just what the hart will do if it receives an event. On PolarFire SoC, and potentially other SiFive based implementations, events from the RISC-V timer do reach a hart during suspend. This is not the case for the implementation on the Allwinner D1 - there timer events are not received during suspend. To fix this, the C3STOP feature was enabled for the timer driver - but this has broken both RCU stall detection and timers generally on PolarFire SoC (and potentially other SiFive based implementations). If an AXI read to the PCIe controller on PolarFire SoC times out, the system will stall, however, with this patch applied, the system just locks up without RCU stalling: io scheduler mq-deadline registered io scheduler kyber registered microchip-pcie 2000000000.pcie: host bridge /soc/pcie@2000000000 ranges: microchip-pcie 2000000000.pcie: MEM 0x2008000000..0x2087ffffff -> 0x0008000000 microchip-pcie 2000000000.pcie: sec error in pcie2axi buffer microchip-pcie 2000000000.pcie: ded error in pcie2axi buffer microchip-pcie 2000000000.pcie: axi read request error microchip-pcie 2000000000.pcie: axi read timeout microchip-pcie 2000000000.pcie: sec error in pcie2axi buffer microchip-pcie 2000000000.pcie: ded error in pcie2axi buffer microchip-pcie 2000000000.pcie: sec error in pcie2axi buffer microchip-pcie 2000000000.pcie: ded error in pcie2axi buffer microchip-pcie 2000000000.pcie: sec error in pcie2axi buffer microchip-pcie 2000000000.pcie: ded error in pcie2axi buffer Freeing initrd memory: 7332K Similarly issues were reported with clock_nanosleep() - with a test app that sleeps each cpu for 6, 5, 4, 3 ms respectively, HZ=250 & the blamed commit in place, the sleep times are rounded up to the next jiffy: == CPU: 1 == == CPU: 2 == == CPU: 3 == == CPU: 4 == Mean: 7.974992 Mean: 7.976534 Mean: 7.962591 Mean: 3.952179 Std Dev: 0.154374 Std Dev: 0.156082 Std Dev: 0.171018 Std Dev: 0.076193 Hi: 9.472000 Hi: 10.495000 Hi: 8.864000 Hi: 4.736000 Lo: 6.087000 Lo: 6.380000 Lo: 4.872000 Lo: 3.403000 Samples: 521 Samples: 521 Samples: 521 Samples: 521 Fortunately, the D1 has a second timer, which is "currently used in preference to the RISC-V/SBI timer driver" so a revert here does not hurt operation of D1 in its current form. Ultimately, a DeviceTree property (or node) will be added to encode the behaviour of the timers, but until then revert the addition of CLOCK_EVT_FEAT_C3STOP. Link: https://lore.kernel.org/linux-riscv/YzYTNQRxLr7Q9JR0@spud/ Link: https://github.com/riscv-non-isa/riscv-sbi-doc/issues/98/ Link: https://lore.kernel.org/linux-riscv/bf6d3b1f-f703-4a25-833e-972a44a04114@xxxxxxxxxxxx/ Fixes: 232ccac1bd9b ("clocksource/drivers/riscv: Events are stopped during CPU suspend") CC: Samuel Holland <samuel@xxxxxxxxxxxx> CC: Anup Patel <anup@xxxxxxxxxxxxxx> CC: Palmer Dabbelt <palmer@xxxxxxxxxxx> Reviewed-by: Palmer Dabbelt <palmer@xxxxxxxxxxxx> Acked-by: Palmer Dabbelt <palmer@xxxxxxxxxxxx> Acked-by: Samuel Holland <samuel@xxxxxxxxxxxx> Signed-off-by: Conor Dooley <conor.dooley@xxxxxxxxxxxxx> Signed-off-by: Anup Patel <apatel@xxxxxxxxxxxxxxxx> --- drivers/clocksource/timer-riscv.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/clocksource/timer-riscv.c b/drivers/clocksource/timer-riscv.c index 969a552da8d2..a0d66fabf073 100644 --- a/drivers/clocksource/timer-riscv.c +++ b/drivers/clocksource/timer-riscv.c @@ -51,7 +51,7 @@ static int riscv_clock_next_event(unsigned long delta, static unsigned int riscv_clock_event_irq; static DEFINE_PER_CPU(struct clock_event_device, riscv_clock_event) = { .name = "riscv_timer_clockevent", - .features = CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_C3STOP, + .features = CLOCK_EVT_FEAT_ONESHOT, .rating = 100, .set_next_event = riscv_clock_next_event, }; -- 2.34.1
