[PATCH v3 14/15] dt-bindings: remoteproc: qcom,sc7180-pas: split into separate file

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Split SC7180 and SC7280remote processor Peripheral Authentication
Service bindings into their own file to reduce complexity and make
maintenance easier.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>

---

Changes since v2:
1. New patch.
---
 .../bindings/remoteproc/qcom,adsp.yaml        |  54 --------
 .../bindings/remoteproc/qcom,sc7180-pas.yaml  | 125 ++++++++++++++++++
 2 files changed, 125 insertions(+), 54 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,sc7180-pas.yaml

diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml
index 9fdfa9476ca9..7848d1d658f4 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml
@@ -22,8 +22,6 @@ properties:
       - qcom,msm8996-slpi-pil
       - qcom,msm8998-adsp-pas
       - qcom,msm8998-slpi-pas
-      - qcom,sc7180-mpss-pas
-      - qcom,sc7280-mpss-pas
       - qcom,sdm660-adsp-pas
       - qcom,sdm845-adsp-pas
       - qcom,sdm845-cdsp-pas
@@ -58,8 +56,6 @@ allOf:
               - qcom,msm8996-adsp-pil
               - qcom,msm8996-slpi-pil
               - qcom,msm8998-adsp-pas
-              - qcom,sc7180-mpss-pas
-              - qcom,sc7280-mpss-pas
               - qcom,sdm845-adsp-pas
               - qcom,sdm845-cdsp-pas
     then:
@@ -108,20 +104,6 @@ allOf:
         interrupt-names:
           maxItems: 5
 
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - qcom,sc7180-mpss-pas
-              - qcom,sc7280-mpss-pas
-    then:
-      properties:
-        interrupts:
-          minItems: 6
-        interrupt-names:
-          minItems: 6
-
   - if:
       properties:
         compatible:
@@ -167,42 +149,6 @@ allOf:
       required:
         - px-supply
 
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - qcom,sc7180-mpss-pas
-    then:
-      properties:
-        power-domains:
-          items:
-            - description: CX power domain
-            - description: MX power domain
-            - description: MSS power domain
-        power-domain-names:
-          items:
-            - const: cx
-            - const: mx
-            - const: mss
-
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - qcom,sc7280-mpss-pas
-    then:
-      properties:
-        power-domains:
-          items:
-            - description: CX power domain
-            - description: MSS power domain
-        power-domain-names:
-          items:
-            - const: cx
-            - const: mss
-
   - if:
       properties:
         compatible:
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sc7180-pas.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sc7180-pas.yaml
new file mode 100644
index 000000000000..6fd768609a66
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,sc7180-pas.yaml
@@ -0,0 +1,125 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/qcom,sc7180-pas.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SC7180/SC7280 Peripheral Authentication Service
+
+maintainers:
+  - Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
+
+description:
+  Qualcomm SC7180/SC7280 SoC Peripheral Authentication Service loads and boots
+  firmware on the Qualcomm DSP Hexagon cores.
+
+properties:
+  compatible:
+    enum:
+      - qcom,sc7180-mpss-pas
+      - qcom,sc7280-mpss-pas
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: XO clock
+
+  clock-names:
+    items:
+      - const: xo
+
+  interrupts:
+    minItems: 6
+
+  interrupt-names:
+    minItems: 6
+
+  power-domains:
+    minItems: 2
+    items:
+      - description: CX power domain
+      - description: MX power domain
+      - description: MSS power domain
+
+  power-domain-names:
+    minItems: 2
+    items:
+      - const: cx
+      - const: mx
+      - const: mss
+
+  qcom,qmp:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: Reference to the AOSS side-channel message RAM.
+
+  smd-edge: false
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/remoteproc/qcom,pas-common.yaml#
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,sc7180-mpss-pas
+    then:
+      properties:
+        power-domains:
+          minItems: 3
+        power-domain-names:
+          minItems: 3
+    else:
+      properties:
+        power-domains:
+          maxItems: 2
+        power-domain-names:
+          maxItems: 2
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    remoteproc@4080000 {
+        compatible = "qcom,sc7180-mpss-pas";
+        reg = <0x04080000 0x4040>;
+
+        clocks = <&rpmhcc RPMH_CXO_CLK>;
+        clock-names = "xo";
+
+        interrupts-extended = <&intc GIC_SPI 266 IRQ_TYPE_EDGE_RISING>,
+                              <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+                              <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+                              <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+                              <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
+                              <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
+        interrupt-names = "wdog", "fatal", "ready", "handover",
+                          "stop-ack", "shutdown-ack";
+
+        memory-region = <&mpss_mem>;
+
+        power-domains = <&rpmhpd SC7180_CX>,
+                        <&rpmhpd SC7180_MX>,
+                        <&rpmhpd SC7180_MSS>;
+        power-domain-names = "cx", "mx", "mss";
+
+        qcom,qmp = <&aoss_qmp>;
+        qcom,smem-states = <&modem_smp2p_out 0>;
+        qcom,smem-state-names = "stop";
+
+        glink-edge {
+            interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>;
+            label = "modem";
+            qcom,remote-pid = <1>;
+            mboxes = <&apss_shared 12>;
+        };
+    };
-- 
2.34.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux