Re: [PATCH v6 6/7] dt/bindings: drm/bridge: it6505: Add mode-switch support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, 24 Nov 2022 18:20:55 +0800, Pin-yen Lin wrote:
> ITE IT6505 can be used in systems to switch the DP traffic between
> two downstreams, which can be USB Type-C DisplayPort alternate mode
> lane or regular DisplayPort output ports.
> 
> Update the binding to accommodate this usage by introducing a
> data-lanes and a mode-switch property on endpoints.
> 
> Signed-off-by: Pin-yen Lin <treapking@xxxxxxxxxxxx>
> 
> ---
> 
> Changes in v6:
> - Remove switches node and use endpoints and data-lanes property to
>   describe the connections.
> 
>  .../bindings/display/bridge/ite,it6505.yaml   | 94 ++++++++++++++++++-
>  1 file changed, 90 insertions(+), 4 deletions(-)
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:
./Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml:99:1: [error] syntax error: found character '\t' that cannot start any token (syntax)

dtschema/dtc warnings/errors:
make[1]: *** Deleting file 'Documentation/devicetree/bindings/display/bridge/ite,it6505.example.dts'
Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml:99:1: found character '\t' that cannot start any token
make[1]: *** [Documentation/devicetree/bindings/Makefile:26: Documentation/devicetree/bindings/display/bridge/ite,it6505.example.dts] Error 1
make[1]: *** Waiting for unfinished jobs....
./Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml:99:1: found character '\t' that cannot start any token
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml: ignoring, error parsing file
make: *** [Makefile:1492: dt_binding_check] Error 2

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20221124102056.393220-7-treapking@xxxxxxxxxxxx

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command.




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux