From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
Add nodes for PMK8550 in separate dtsi file.
Signed-off-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
---
Changes since v1:
* added the PBS reg and reg-name
* added Konrad's R-b tag
arch/arm64/boot/dts/qcom/pmk8550.dtsi | 55 +++++++++++++++++++++++++++
1 file changed, 55 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/pmk8550.dtsi
diff --git a/arch/arm64/boot/dts/qcom/pmk8550.dtsi b/arch/arm64/boot/dts/qcom/pmk8550.dtsi
new file mode 100644
index 000000000000..47213d05bf92
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pmk8550.dtsi
@@ -0,0 +1,55 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Linaro Limited
+ */
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+&spmi_bus {
+ pmk8550: pmic@0 {
+ compatible = "qcom,pm8550", "qcom,spmi-pmic";
+ reg = <0x0 SPMI_USID>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pmk8550_pon: pon@1300 {
+ compatible = "qcom,pm8998-pon";
+ reg = <0x1300>, <0x800>;
+ reg-names = "hlos", "pbs";
+
+ pon_pwrkey: pwrkey {
+ compatible = "qcom,pmk8350-pwrkey";
+ interrupts = <0x0 0x13 0x7 IRQ_TYPE_EDGE_BOTH>;
+ linux,code = <KEY_POWER>;
+ status = "disabled";
+ };
+
+ pon_resin: resin {
+ compatible = "qcom,pmk8350-resin";
+ interrupts = <0x0 0x13 0x6 IRQ_TYPE_EDGE_BOTH>;
+ status = "disabled";
+ };
+ };
+
+ pmk8550_rtc: rtc@6100 {
+ compatible = "qcom,pmk8350-rtc";
+ reg = <0x6100>, <0x6200>;
+ reg-names = "rtc", "alarm";
+ interrupts = <0x0 0x62 0x1 IRQ_TYPE_EDGE_RISING>;
+ status = "disabled";
+ };
+
+ pmk8550_gpios: gpio@8800 {
+ compatible = "qcom,pmk8550-gpio", "qcom,spmi-gpio";
+ reg = <0xb800>;
+ gpio-controller;
+ gpio-ranges = <&pmk8550_gpios 0 0 6>;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+};
--
2.34.1
