Re: [PATCH 2/5] dt-bindings: pwm: Add RZ/V2M PWM binding

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Biju,

On Fri, Nov 18, 2022 at 2:16 PM Biju Das <biju.das.jz@xxxxxxxxxxxxxx> wrote:
> Add device tree bindings for the RZ/V2{M, MA} PWM Timer (PWM).
>
> Signed-off-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>

Thanks for your patch!

> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pwm/renesas,rzv2m-pwm.yaml
> @@ -0,0 +1,98 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pwm/renesas,rzv2m-pwm.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Renesas RZ/V2{M, MA} PWM Timer (PWM)
> +
> +maintainers:
> +  - Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
> +
> +description: |
> +  The RZ/V2{M, MA} PWM Timer (PWM) composed of 16 channels. It supports the
> +  following functions
> +  * The PWM has 24-bit counters which operate at PWM_CLK (48 MHz).
> +  * The frequency division ratio for internal counter operation is selectable
> +    as PWM_CLK divided by 1, 16, 256, or 2048.
> +  * The period as well as the duty cycle is adjustable.
> +  * The low-level and high-level order of the PWM signals can be inverted.
> +  * The duty cycle of the PWM signal is selectable in the range from 0 to 100%.
> +  * The minimum resolution is 20.83 ns.
> +  * Three interrupt sources: Rising and falling edges of the PWM signal and
> +    clearing of the counter
> +  * Counter operation and the bus interface are asynchronous and both can
> +    operate independently of the magnitude relationship of the respective
> +    clock periods.
> +
> +properties:
> +  compatible:
> +    items:
> +      - enum:
> +          - renesas,r9a09g011-pwm  # RZ/V2M
> +          - renesas,r9a09g055-pwm  # RZ/V2MA
> +      - const: renesas,rzv2m-pwm
> +
> +  reg:
> +    maxItems: 1
> +
> +  '#pwm-cells':
> +    const: 2
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  clocks:
> +    items:
> +      - description: CPU Peripheral Group F APB clock

"APB clock"

PWM0-7] are part of Peripheral Group E, and the block might be
reused on SoCs not using CPU Peripheral Group clock signals.

> +      - description: PWM clock
> +
> +  clock-names:
> +    items:
> +      - const: apb
> +      - const: pwm
> +
> +  power-domains:
> +    maxItems: 1
> +
> +  resets:
> +    maxItems: 1
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - clocks
> +  - clock-names
> +  - power-domains
> +
> +if:
> +  properties:
> +    compatible:
> +      contains:
> +        enum:
> +          - renesas,r9a09g055-pwm
> +then:
> +  required:
> +    - resets

I think you should make the resets property required unconditionally.
DT describes hardware, not software policy.

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux