Hello Fabio,
Am Montag, dem 21.11.2022 um 13:29 -0300 schrieb Fabio Estevam:
> From: Fabio Estevam <festevam@xxxxxxx>
>
> 'regulator-compatible' is not a valid property according to
> nxp,pca9450-regulator.yaml and causes the following warning:
>
> DTC_CHK arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dtb
> ...
> pmic@25: regulators:LDO1: Unevaluated properties are not allowed
> ('regulator-compatible' was unexpected)
>
> Remove the invalid 'regulator-compatible' property.
Reviewed-by: Teresa Remmet <t.remmet@xxxxxxxxx>
thank you for the patch. I have noticed this already, too..
But the patch stack that includes this, still waits for getting
finished up. So you where quicker.
Regards,
Teresa
>
> Cc: Teresa Remmet <t.remmet@xxxxxxxxx>
> Fixes: 88f7f6bcca37 ("arm64: dts: freescale: Add support for
> phyBOARD-Pollux-i.MX8MP")
> Signed-off-by: Fabio Estevam <festevam@xxxxxxx>
> ---
> arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi | 10 -------
> ---
> 1 file changed, 10 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi
> b/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi
> index 79b290a002c1..ecc4bce6db97 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi
> @@ -99,7 +99,6 @@ pmic: pmic@25 {
>
> regulators {
> buck1: BUCK1 {
> - regulator-compatible = "BUCK1";
> regulator-min-microvolt = <600000>;
> regulator-max-microvolt = <2187500>;
> regulator-boot-on;
> @@ -108,7 +107,6 @@ buck1: BUCK1 {
> };
>
> buck2: BUCK2 {
> - regulator-compatible = "BUCK2";
> regulator-min-microvolt = <600000>;
> regulator-max-microvolt = <2187500>;
> regulator-boot-on;
> @@ -119,7 +117,6 @@ buck2: BUCK2 {
> };
>
> buck4: BUCK4 {
> - regulator-compatible = "BUCK4";
> regulator-min-microvolt = <600000>;
> regulator-max-microvolt = <3400000>;
> regulator-boot-on;
> @@ -127,7 +124,6 @@ buck4: BUCK4 {
> };
>
> buck5: BUCK5 {
> - regulator-compatible = "BUCK5";
> regulator-min-microvolt = <600000>;
> regulator-max-microvolt = <3400000>;
> regulator-boot-on;
> @@ -135,7 +131,6 @@ buck5: BUCK5 {
> };
>
> buck6: BUCK6 {
> - regulator-compatible = "BUCK6";
> regulator-min-microvolt = <600000>;
> regulator-max-microvolt = <3400000>;
> regulator-boot-on;
> @@ -143,7 +138,6 @@ buck6: BUCK6 {
> };
>
> ldo1: LDO1 {
> - regulator-compatible = "LDO1";
> regulator-min-microvolt = <1600000>;
> regulator-max-microvolt = <3300000>;
> regulator-boot-on;
> @@ -151,7 +145,6 @@ ldo1: LDO1 {
> };
>
> ldo2: LDO2 {
> - regulator-compatible = "LDO2";
> regulator-min-microvolt = <800000>;
> regulator-max-microvolt = <1150000>;
> regulator-boot-on;
> @@ -159,7 +152,6 @@ ldo2: LDO2 {
> };
>
> ldo3: LDO3 {
> - regulator-compatible = "LDO3";
> regulator-min-microvolt = <800000>;
> regulator-max-microvolt = <3300000>;
> regulator-boot-on;
> @@ -167,13 +159,11 @@ ldo3: LDO3 {
> };
>
> ldo4: LDO4 {
> - regulator-compatible = "LDO4";
> regulator-min-microvolt = <800000>;
> regulator-max-microvolt = <3300000>;
> };
>
> ldo5: LDO5 {
> - regulator-compatible = "LDO5";
> regulator-min-microvolt = <1800000>;
> regulator-max-microvolt = <3300000>;
> regulator-boot-on;
--
PHYTEC Messtechnik GmbH | Barcelona-Allee 1 | 55129 Mainz, Germany
Geschäftsführer: Dipl.-Ing. Michael Mitezki, Dipl.-Ing. Bodo Huber |
Handelsregister Mainz HRB 4656 | Finanzamt Mainz | St.Nr. 266500608, DE
149059855
