Re: [PATCH v1 1/4] dt-bindings: interrupt-controller: mediatek,cirq: Migrate to dt schema

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 18/11/2022 11:06, AngeloGioacchino Del Regno wrote:
> Migrate mediatek,cirq.txt to dt schema as mediatek,mtk-cirq.yaml.
> While at it, I've also fixed some typos that were present in the
> original txt binding, as it was suggesting that the compatible
> string would have "mediatek,cirq" as compatible but, in reality,
> that's supposed to be "mediatek,mtk-cirq" instead.
> 
> Little rewording on property descriptions also happened for
> them to be more concise.
> 
> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
> ---
>  .../interrupt-controller/mediatek,cirq.txt    | 33 ---------
>  .../mediatek,mtk-cirq.yaml                    | 70 +++++++++++++++++++
>  2 files changed, 70 insertions(+), 33 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/interrupt-controller/mediatek,cirq.txt
>  create mode 100644 Documentation/devicetree/bindings/interrupt-controller/mediatek,mtk-cirq.yaml
> 
> diff --git a/Documentation/devicetree/bindings/interrupt-controller/mediatek,cirq.txt b/Documentation/devicetree/bindings/interrupt-controller/mediatek,cirq.txt
> deleted file mode 100644
> index 5865f4f2c69d..000000000000
> --- a/Documentation/devicetree/bindings/interrupt-controller/mediatek,cirq.txt
> +++ /dev/null
> @@ -1,33 +0,0 @@
> -* Mediatek 27xx cirq
> -
> -In Mediatek SOCs, the CIRQ is a low power interrupt controller designed to
> -work outside MCUSYS which comprises with Cortex-Ax cores,CCI and GIC.
> -The external interrupts (outside MCUSYS) will feed through CIRQ and connect
> -to GIC in MCUSYS. When CIRQ is enabled, it will record the edge-sensitive
> -interrupts and generate a pulse signal to parent interrupt controller when
> -flush command is executed. With CIRQ, MCUSYS can be completely turned off
> -to improve the system power consumption without losing interrupts.
> -
> -Required properties:
> -- compatible: should be one of
> -  - "mediatek,mt2701-cirq" for mt2701 CIRQ
> -  - "mediatek,mt8135-cirq" for mt8135 CIRQ
> -  - "mediatek,mt8173-cirq" for mt8173 CIRQ
> -  and "mediatek,cirq" as a fallback.
> -- interrupt-controller : Identifies the node as an interrupt controller.
> -- #interrupt-cells : Use the same format as specified by GIC in arm,gic.txt.
> -- reg: Physical base address of the cirq registers and length of memory
> -  mapped region.
> -- mediatek,ext-irq-range: Identifies external irq number range in different
> -  SOCs.
> -
> -Example:
> -	cirq: interrupt-controller@10204000 {
> -		compatible = "mediatek,mt2701-cirq",
> -			     "mediatek,mtk-cirq";
> -		interrupt-controller;
> -		#interrupt-cells = <3>;
> -		interrupt-parent = <&sysirq>;
> -		reg = <0 0x10204000 0 0x400>;
> -		mediatek,ext-irq-start = <32 200>;
> -	};
> diff --git a/Documentation/devicetree/bindings/interrupt-controller/mediatek,mtk-cirq.yaml b/Documentation/devicetree/bindings/interrupt-controller/mediatek,mtk-cirq.yaml
> new file mode 100644
> index 000000000000..21e709169907
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/interrupt-controller/mediatek,mtk-cirq.yaml
> @@ -0,0 +1,70 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/interrupt-controller/mediatek,mtk-cirq.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: MediaTek System Interrupt Controller
> +
> +maintainers:
> +  - Youlin Pei <youlin.pei@xxxxxxxxxxxx>
> +
> +description:
> +  In MediaTek SoCs, the CIRQ is a low power interrupt controller designed to
> +  work outside of MCUSYS which comprises with Cortex-Ax cores, CCI and GIC.
> +  The external interrupts (outside MCUSYS) will feed through CIRQ and connect
> +  to GIC in MCUSYS. When CIRQ is enabled, it will record the edge-sensitive
> +  interrupts and generate a pulse signal to parent interrupt controller when
> +  flush command is executed. With CIRQ, MCUSYS can be completely turned off
> +  to improve the system power consumption without losing interrupts.
> +
> +
> +properties:
> +  compatible:
> +    items:
> +      - enum:
> +          - mediatek,mt2701-cirq
> +          - mediatek,mt8135-cirq
> +          - mediatek,mt8173-cirq
> +      - const: mediatek,mtk-cirq
> +
> +  reg:
> +    maxItems: 1
> +    description: Address and size of the CIRQ registers

Drop description, it's obvious.

> +
> +  '#interrupt-cells':
> +    const: 3
> +
> +  interrupt-controller: true
> +
> +  mediatek,ext-irq-range:
> +    $ref: /schemas/types.yaml#/definitions/uint32-array
> +    maxItems: 1

This points it's array..

> +    items:
> +      items:

But this it's matrix.

> +        - description: First CIRQ interrupt
> +        - description: Last CIRQ interrupt

I guess it you should be just array with only one "items:" keyword.

> +    description:
> +      Identifies the range of external interrupts in different SoCs
> +

Best regards,
Krzysztof




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux