Re: [PATCH v4 2/2] arm64: dts: qcom: Add base QDU1000/QRU1000 IDP DTs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 11/21/2022 5:07 AM, Konrad Dybcio wrote:
>
> On 18.11.2022 20:22, Melody Olvera wrote:
>> Add DTs for Qualcomm IDP platforms using the QDU1000 and QRU1000
>> SoCs.
>>
>> Signed-off-by: Melody Olvera <quic_molvera@xxxxxxxxxxx>
>> ---
>>  arch/arm64/boot/dts/qcom/Makefile        |   2 +
>>  arch/arm64/boot/dts/qcom/qdu1000-idp.dts | 266 +++++++++++++++++++++++
>>  arch/arm64/boot/dts/qcom/qru1000-idp.dts | 266 +++++++++++++++++++++++
>>  3 files changed, 534 insertions(+)
>>  create mode 100644 arch/arm64/boot/dts/qcom/qdu1000-idp.dts
>>  create mode 100644 arch/arm64/boot/dts/qcom/qru1000-idp.dts
>>
>> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
>> index afe496a93f94..da66d4a0a884 100644
>> --- a/arch/arm64/boot/dts/qcom/Makefile
>> +++ b/arch/arm64/boot/dts/qcom/Makefile
>> @@ -53,7 +53,9 @@ dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-sony-xperia-yoshino-maple.dtb
>>  dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-sony-xperia-yoshino-poplar.dtb
>>  dtb-$(CONFIG_ARCH_QCOM)	+= qcs404-evb-1000.dtb
>>  dtb-$(CONFIG_ARCH_QCOM)	+= qcs404-evb-4000.dtb
>> +dtb-$(CONFIG_ARCH_QCOM)	+= qdu1000-idp.dtb
>>  dtb-$(CONFIG_ARCH_QCOM)	+= qrb5165-rb5.dtb
>> +dtb-$(CONFIG_ARCH_QCOM)	+= qru1000-idp.dtb
>>  dtb-$(CONFIG_ARCH_QCOM)	+= sa8155p-adp.dtb
>>  dtb-$(CONFIG_ARCH_QCOM)	+= sa8295p-adp.dtb
>>  dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-idp.dtb
>> diff --git a/arch/arm64/boot/dts/qcom/qdu1000-idp.dts b/arch/arm64/boot/dts/qcom/qdu1000-idp.dts
>> new file mode 100644
>> index 000000000000..5aed483201fa
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/qcom/qdu1000-idp.dts
>> @@ -0,0 +1,266 @@
>> +// SPDX-License-Identifier: BSD-3-Clause
>> +/*
>> + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
>> + */
>> +
>> +/dts-v1/;
>> +
>> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
>> +#include "qdu1000.dtsi"
>> +#include "pm8150.dtsi"
>> +
>> +/ {
>> +	model = "Qualcomm Technologies, Inc. QDU1000 IDP";
>> +	compatible = "qcom,qdu1000-idp", "qcom,qdu1000";
> Missing chassis-type

Sorry, not sure what you mean here... Do you mean like QRD, HDK, MTP, etc.?
If so, then IDP is the chassis type.

>
>> +
>> +	aliases {
>> +		serial0 = &uart7;
>> +	};
>> +
>> +	clocks {
>> +		xo_board: xo-board {
>> +			compatible = "fixed-clock";
>> +			clock-frequency = <19200000>;
>> +			clock-output-names = "xo_board";
>> +			#clock-cells = <0>;
>> +		};
>> +
>> +		sleep_clk: sleep-clk {
>> +			compatible = "fixed-clock";
>> +			clock-frequency = <32000>;
>> +			#clock-cells = <0>;
>> +		};
>> +
>> +		pcie_0_pipe_clk: pcie-0-pipe-clk {
>> +			compatible = "fixed-clock";
>> +			clock-frequency = <1000>;
>> +			clock-output-names = "pcie_0_pipe_clk";
>> +			#clock-cells = <0>;
>> +		};
>> +
>> +		pcie_0_phy_aux_clk: pcie-0-phy-aux-clk {
>> +			compatible = "fixed-clock";
>> +			clock-frequency = <1000>;
>> +			clock-output-names = "pcie_0_phy_aux_clk";
>> +			#clock-cells = <0>;
>> +		};
>> +
>> +		usb3_phy_wrapper_pipe_clk: usb3-phy-wrapper-pipe-clk {
>> +			compatible = "fixed-clock";
>> +			clock-frequency = <1000>;
>> +			clock-output-names = "usb3_phy_wrapper_pipe_clk";
>> +			#clock-cells = <0>;
>> +		};
> Do these pipe clocks not come from QMPPHY?

Yes they do; I just don't have those phys ready yet. I can put a TODO here to
move them if necessary.

>
>> +	};
>> +
>> +	chosen {
>> +		stdout-path = "serial0:115200n8";
>> +	};
>> +
>> +	ppvar_sys: ppvar-sys-regulator {
>> +		compatible = "regulator-fixed";
>> +		regulator-name = "ppvar_sys";
> Any chance you could add the voltage of this regulator here,
> so the DT can better represent the hardware?

Sure.

Thanks,
Melody
> Konrad
>> +		regulator-always-on;
>> +		regulator-boot-on;
>> +	};
>> +
>> +	vph_pwr: vph-pwr-regulator {
>> +		compatible = "regulator-fixed";
>> +		regulator-name = "vph_pwr";
>> +		regulator-min-microvolt = <3700000>;
>> +		regulator-max-microvolt = <3700000>;
>> +
>> +		regulator-always-on;
>> +		regulator-boot-on;
>> +
>> +		vin-supply = <&ppvar_sys>;
>> +	};
>> +};
>> +
>> +&apps_rsc {
>> +	regulators {
>> +		compatible = "qcom,pm8150-rpmh-regulators";
>> +		qcom,pmic-id = "a";
>> +
>> +		vdd-s1-supply = <&vph_pwr>;
>> +		vdd-s2-supply = <&vph_pwr>;
>> +		vdd-s3-supply = <&vph_pwr>;
>> +		vdd-s4-supply = <&vph_pwr>;
>> +		vdd-s5-supply = <&vph_pwr>;
>> +		vdd-s6-supply = <&vph_pwr>;
>> +		vdd-s7-supply = <&vph_pwr>;
>> +		vdd-s8-supply = <&vph_pwr>;
>> +		vdd-s9-supply = <&vph_pwr>;
>> +		vdd-s10-supply = <&vph_pwr>;
>> +
>> +		vdd-l1-l8-l11-supply = <&vreg_s6a_0p9>;
>> +		vdd-l2-l10-supply = <&vph_pwr>;
>> +		vdd-l3-l4-l5-l18-supply = <&vreg_s5a_2p0>;
>> +		vdd-l6-l9-supply = <&vreg_s6a_0p9>;
>> +		vdd-l7-l12-l14-l15-supply = <&vreg_s4a_1p8>;
>> +		vdd-l13-l16-l17-supply = <&vph_pwr>;
>> +
>> +		vreg_s2a_0p5: smps2 {
>> +			regulator-name = "vreg_s2a_0p5";
>> +			regulator-min-microvolt = <320000>;
>> +			regulator-max-microvolt = <570000>;
>> +		};
>> +
>> +		vreg_s3a_1p05: smps3 {
>> +			regulator-name = "vreg_s3a_1p05";
>> +			regulator-min-microvolt = <950000>;
>> +			regulator-max-microvolt = <1170000>;
>> +		};
>> +
>> +		vreg_s4a_1p8: smps4 {
>> +			regulator-name = "vreg_s4a_1p8";
>> +			regulator-min-microvolt = <1800000>;
>> +			regulator-max-microvolt = <1800000>;
>> +		};
>> +
>> +		vreg_s5a_2p0: smps5 {
>> +			regulator-name = "vreg_s5a_2p0";
>> +			regulator-min-microvolt = <1904000>;
>> +			regulator-max-microvolt = <2000000>;
>> +		};
>> +
>> +		vreg_s6a_0p9: smps6 {
>> +			regulator-name = "vreg_s6a_0p9";
>> +			regulator-min-microvolt = <920000>;
>> +			regulator-max-microvolt = <1128000>;
>> +		};
>> +
>> +		vreg_s7a_1p2: smps7 {
>> +			regulator-name = "vreg_s7a_1p2";
>> +			regulator-min-microvolt = <1200000>;
>> +			regulator-max-microvolt = <1200000>;
>> +		};
>> +
>> +		vreg_s8a_1p3: smps8 {
>> +			regulator-name = "vreg_s8a_1p3";
>> +			regulator-min-microvolt = <1352000>;
>> +			regulator-max-microvolt = <1352000>;
>> +		};
>> +
>> +		vreg_l1a_0p91: ldo1 {
>> +			regulator-name = "vreg_l1a_0p91";
>> +			regulator-min-microvolt = <312000>;
>> +			regulator-max-microvolt = <1304000>;
>> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
>> +		};
>> +
>> +		vreg_l2a_2p3: ldo2 {
>> +			regulator-name = "vreg_l2a_2p3";
>> +			regulator-min-microvolt = <2970000>;
>> +			regulator-max-microvolt = <3300000>;
>> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
>> +		};
>> +
>> +		vreg_l3a_1p2: ldo3 {
>> +			regulator-name = "vreg_l3a_1p2";
>> +			regulator-min-microvolt = <920000>;
>> +			regulator-max-microvolt = <1260000>;
>> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
>> +		};
>> +
>> +		vreg_l5a_0p8: ldo5 {
>> +			regulator-name = "vreg_l5a_0p8";
>> +			regulator-min-microvolt = <312000>;
>> +			regulator-max-microvolt = <1304000>;
>> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
>> +		};
>> +
>> +		vreg_l6a_0p91: ldo6 {
>> +			regulator-name = "vreg_l6a_0p91";
>> +			regulator-min-microvolt = <880000>;
>> +			regulator-max-microvolt = <950000>;
>> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
>> +		};
>> +
>> +		vreg_l7a_1p8: ldo7 {
>> +			regulator-name = "vreg_l7a_1p8";
>> +			regulator-min-microvolt = <1650000>;
>> +			regulator-max-microvolt = <2000000>;
>> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
>> +
>> +		};
>> +
>> +		vreg_l8a_0p91: ldo8 {
>> +			regulator-name = "vreg_l8a_0p91";
>> +			regulator-min-microvolt = <888000>;
>> +			regulator-max-microvolt = <925000>;
>> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
>> +		};
>> +
>> +		vreg_l9a_0p91: ldo9 {
>> +			regulator-name = "vreg_l8a_0p91";
>> +			regulator-min-microvolt = <312000>;
>> +			regulator-max-microvolt = <1304000>;
>> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
>> +		};
>> +
>> +		vreg_l10a_2p95: ldo10 {
>> +			regulator-name = "vreg_l10a_2p95";
>> +			regulator-min-microvolt = <2700000>;
>> +			regulator-max-microvolt = <3544000>;
>> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
>> +		};
>> +
>> +		vreg_l11a_0p91: ldo11 {
>> +			regulator-name = "vreg_l11a_0p91";
>> +			regulator-min-microvolt = <800000>;
>> +			regulator-max-microvolt = <1000000>;
>> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
>> +		};
>> +
>> +		vreg_l12a_1p8: ldo12 {
>> +			regulator-name = "vreg_l12a_1p8";
>> +			regulator-min-microvolt = <1504000>;
>> +			regulator-max-microvolt = <1504000>;
>> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
>> +		};
>> +
>> +		vreg_l14a_1p8: ldo14 {
>> +			regulator-name = "vreg_l14a_1p8";
>> +			regulator-min-microvolt = <1650000>;
>> +			regulator-max-microvolt = <1950000>;
>> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
>> +		};
>> +
>> +		vreg_l15a_1p8: ldo15 {
>> +			regulator-name = "vreg_l15a_1p8";
>> +			regulator-min-microvolt = <1504000>;
>> +			regulator-max-microvolt = <2000000>;
>> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
>> +		};
>> +
>> +		vreg_l16a_1p8: ldo16 {
>> +			regulator-name = "vreg_l16a_1p8";
>> +			regulator-min-microvolt = <1710000>;
>> +			regulator-max-microvolt = <1890000>;
>> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
>> +		};
>> +
>> +		vreg_l17a_3p3: ldo17 {
>> +			regulator-name = "vreg_l17a_3p3";
>> +			regulator-min-microvolt = <3000000>;
>> +			regulator-max-microvolt = <3544000>;
>> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
>> +		};
>> +
>> +		vreg_l18a_1p2: ldo18 {
>> +			regulator-name = "vreg_l18a_1p2";
>> +			regulator-min-microvolt = <312000>;
>> +			regulator-max-microvolt = <1304000>;
>> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
>> +		};
>> +	};
>> +};
>> +
>> +&qupv3_id_0 {
>> +	status = "okay";
>> +};
>> +
>> +&uart7 {
>> +	status = "okay";
>> +};
>> diff --git a/arch/arm64/boot/dts/qcom/qru1000-idp.dts b/arch/arm64/boot/dts/qcom/qru1000-idp.dts
>> new file mode 100644
>> index 000000000000..42eb0c33e7ba
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/qcom/qru1000-idp.dts
>> @@ -0,0 +1,266 @@
>> +// SPDX-License-Identifier: BSD-3-Clause
>> +/*
>> + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
>> + */
>> +
>> +/dts-v1/;
>> +
>> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
>> +#include "qru1000.dtsi"
>> +#include "pm8150.dtsi"
>> +
>> +/ {
>> +	model = "Qualcomm Technologies, Inc. QRU1000 IDP";
>> +	compatible = "qcom,qru1000-idp", "qcom,qru1000";
>> +
>> +	aliases {
>> +		serial0 = &uart7;
>> +	};
>> +
>> +	clocks {
>> +		xo_board: xo-board {
>> +			compatible = "fixed-clock";
>> +			clock-frequency = <19200000>;
>> +			clock-output-names = "xo_board";
>> +			#clock-cells = <0>;
>> +		};
>> +
>> +		sleep_clk: sleep-clk {
>> +			compatible = "fixed-clock";
>> +			clock-frequency = <32000>;
>> +			#clock-cells = <0>;
>> +		};
>> +
>> +		pcie_0_pipe_clk: pcie-0-pipe-clk {
>> +			compatible = "fixed-clock";
>> +			clock-frequency = <1000>;
>> +			clock-output-names = "pcie_0_pipe_clk";
>> +			#clock-cells = <0>;
>> +		};
>> +
>> +		pcie_0_phy_aux_clk: pcie-0-phy-aux-clk {
>> +			compatible = "fixed-clock";
>> +			clock-frequency = <1000>;
>> +			clock-output-names = "pcie_0_phy_aux_clk";
>> +			#clock-cells = <0>;
>> +		};
>> +
>> +		usb3_phy_wrapper_pipe_clk: usb3-phy-wrapper-pipe-clk {
>> +			compatible = "fixed-clock";
>> +			clock-frequency = <1000>;
>> +			clock-output-names = "usb3_phy_wrapper_pipe_clk";
>> +			#clock-cells = <0>;
>> +		};
>> +	};
>> +
>> +	chosen {
>> +		stdout-path = "serial0:115200n8";
>> +	};
>> +
>> +	ppvar_sys: ppvar-sys-regulator {
>> +		compatible = "regulator-fixed";
>> +		regulator-name = "ppvar_sys";
>> +		regulator-always-on;
>> +		regulator-boot-on;
>> +	};
>> +
>> +	vph_pwr: vph-pwr-regulator {
>> +		compatible = "regulator-fixed";
>> +		regulator-name = "vph_pwr";
>> +		regulator-min-microvolt = <3700000>;
>> +		regulator-max-microvolt = <3700000>;
>> +
>> +		regulator-always-on;
>> +		regulator-boot-on;
>> +
>> +		vin-supply = <&ppvar_sys>;
>> +	};
>> +};
>> +
>> +&apps_rsc {
>> +	regulators {
>> +		compatible = "qcom,pm8150-rpmh-regulators";
>> +		qcom,pmic-id = "a";
>> +
>> +		vdd-s1-supply = <&vph_pwr>;
>> +		vdd-s2-supply = <&vph_pwr>;
>> +		vdd-s3-supply = <&vph_pwr>;
>> +		vdd-s4-supply = <&vph_pwr>;
>> +		vdd-s5-supply = <&vph_pwr>;
>> +		vdd-s6-supply = <&vph_pwr>;
>> +		vdd-s7-supply = <&vph_pwr>;
>> +		vdd-s8-supply = <&vph_pwr>;
>> +		vdd-s9-supply = <&vph_pwr>;
>> +		vdd-s10-supply = <&vph_pwr>;
>> +
>> +		vdd-l1-l8-l11-supply = <&vreg_s6a_0p9>;
>> +		vdd-l2-l10-supply = <&vph_pwr>;
>> +		vdd-l3-l4-l5-l18-supply = <&vreg_s5a_2p0>;
>> +		vdd-l6-l9-supply = <&vreg_s6a_0p9>;
>> +		vdd-l7-l12-l14-l15-supply = <&vreg_s4a_1p8>;
>> +		vdd-l13-l16-l17-supply = <&vph_pwr>;
>> +
>> +		vreg_s2a_0p5: smps2 {
>> +			regulator-name = "vreg_s2a_0p5";
>> +			regulator-min-microvolt = <320000>;
>> +			regulator-max-microvolt = <570000>;
>> +		};
>> +
>> +		vreg_s3a_1p05: smps3 {
>> +			regulator-name = "vreg_s3a_1p05";
>> +			regulator-min-microvolt = <950000>;
>> +			regulator-max-microvolt = <1170000>;
>> +		};
>> +
>> +		vreg_s4a_1p8: smps4 {
>> +			regulator-name = "vreg_s4a_1p8";
>> +			regulator-min-microvolt = <1800000>;
>> +			regulator-max-microvolt = <1800000>;
>> +		};
>> +
>> +		vreg_s5a_2p0: smps5 {
>> +			regulator-name = "vreg_s5a_2p0";
>> +			regulator-min-microvolt = <1904000>;
>> +			regulator-max-microvolt = <2000000>;
>> +		};
>> +
>> +		vreg_s6a_0p9: smps6 {
>> +			regulator-name = "vreg_s6a_0p9";
>> +			regulator-min-microvolt = <920000>;
>> +			regulator-max-microvolt = <1128000>;
>> +		};
>> +
>> +		vreg_s7a_1p2: smps7 {
>> +			regulator-name = "vreg_s7a_1p2";
>> +			regulator-min-microvolt = <1200000>;
>> +			regulator-max-microvolt = <1200000>;
>> +		};
>> +
>> +		vreg_s8a_1p3: smps8 {
>> +			regulator-name = "vreg_s8a_1p3";
>> +			regulator-min-microvolt = <1352000>;
>> +			regulator-max-microvolt = <1352000>;
>> +		};
>> +
>> +		vreg_l1a_0p91: ldo1 {
>> +			regulator-name = "vreg_l1a_0p91";
>> +			regulator-min-microvolt = <312000>;
>> +			regulator-max-microvolt = <1304000>;
>> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
>> +		};
>> +
>> +		vreg_l2a_2p3: ldo2 {
>> +			regulator-name = "vreg_l2a_2p3";
>> +			regulator-min-microvolt = <2970000>;
>> +			regulator-max-microvolt = <3300000>;
>> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
>> +		};
>> +
>> +		vreg_l3a_1p2: ldo3 {
>> +			regulator-name = "vreg_l3a_1p2";
>> +			regulator-min-microvolt = <920000>;
>> +			regulator-max-microvolt = <1260000>;
>> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
>> +		};
>> +
>> +		vreg_l5a_0p8: ldo5 {
>> +			regulator-name = "vreg_l5a_0p8";
>> +			regulator-min-microvolt = <312000>;
>> +			regulator-max-microvolt = <1304000>;
>> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
>> +		};
>> +
>> +		vreg_l6a_0p91: ldo6 {
>> +			regulator-name = "vreg_l6a_0p91";
>> +			regulator-min-microvolt = <880000>;
>> +			regulator-max-microvolt = <950000>;
>> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
>> +		};
>> +
>> +		vreg_l7a_1p8: ldo7 {
>> +			regulator-name = "vreg_l7a_1p8";
>> +			regulator-min-microvolt = <1650000>;
>> +			regulator-max-microvolt = <2000000>;
>> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
>> +
>> +		};
>> +
>> +		vreg_l8a_0p91: ldo8 {
>> +			regulator-name = "vreg_l8a_0p91";
>> +			regulator-min-microvolt = <888000>;
>> +			regulator-max-microvolt = <925000>;
>> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
>> +		};
>> +
>> +		vreg_l9a_0p91: ldo9 {
>> +			regulator-name = "vreg_l8a_0p91";
>> +			regulator-min-microvolt = <312000>;
>> +			regulator-max-microvolt = <1304000>;
>> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
>> +		};
>> +
>> +		vreg_l10a_2p95: ldo10 {
>> +			regulator-name = "vreg_l10a_2p95";
>> +			regulator-min-microvolt = <2700000>;
>> +			regulator-max-microvolt = <3544000>;
>> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
>> +		};
>> +
>> +		vreg_l11a_0p91: ldo11 {
>> +			regulator-name = "vreg_l11a_0p91";
>> +			regulator-min-microvolt = <800000>;
>> +			regulator-max-microvolt = <1000000>;
>> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
>> +		};
>> +
>> +		vreg_l12a_1p8: ldo12 {
>> +			regulator-name = "vreg_l12a_1p8";
>> +			regulator-min-microvolt = <1504000>;
>> +			regulator-max-microvolt = <1504000>;
>> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
>> +		};
>> +
>> +		vreg_l14a_1p8: ldo14 {
>> +			regulator-name = "vreg_l14a_1p8";
>> +			regulator-min-microvolt = <1650000>;
>> +			regulator-max-microvolt = <1950000>;
>> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
>> +		};
>> +
>> +		vreg_l15a_1p8: ldo15 {
>> +			regulator-name = "vreg_l15a_1p8";
>> +			regulator-min-microvolt = <1504000>;
>> +			regulator-max-microvolt = <2000000>;
>> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
>> +		};
>> +
>> +		vreg_l16a_1p8: ldo16 {
>> +			regulator-name = "vreg_l16a_1p8";
>> +			regulator-min-microvolt = <1710000>;
>> +			regulator-max-microvolt = <1890000>;
>> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
>> +		};
>> +
>> +		vreg_l17a_3p3: ldo17 {
>> +			regulator-name = "vreg_l17a_3p3";
>> +			regulator-min-microvolt = <3000000>;
>> +			regulator-max-microvolt = <3544000>;
>> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
>> +		};
>> +
>> +		vreg_l18a_1p2: ldo18 {
>> +			regulator-name = "vreg_l18a_1p2";
>> +			regulator-min-microvolt = <312000>;
>> +			regulator-max-microvolt = <1304000>;
>> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
>> +		};
>> +	};
>> +};
>> +
>> +&qupv3_id_0 {
>> +	status = "okay";
>> +};
>> +
>> +&uart7 {
>> +	status = "okay";
>> +};




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux