Re: [PATCH v6 06/11] arm64: dts: mt7986: add spi related device nodes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 18/11/2022 20:01, Frank Wunderlich wrote:
From: Sam Shih <sam.shih@xxxxxxxxxxxx>

This patch adds spi support for MT7986.

Signed-off-by: Sam Shih <sam.shih@xxxxxxxxxxxx>
Signed-off-by: Frank Wunderlich <frank-w@xxxxxxxxxxxxxxx>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>

Applied, thanks!

---
  arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts | 35 ++++++++++++++++++++
  arch/arm64/boot/dts/mediatek/mt7986a.dtsi    | 28 ++++++++++++++++
  arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts | 35 ++++++++++++++++++++
  3 files changed, 98 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts b/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
index 2f48cc3d3ddb..006878e3f2b2 100644
--- a/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
@@ -59,6 +59,20 @@ switch: switch@0 {
  };
&pio {
+	spi_flash_pins: spi-flash-pins {
+		mux {
+			function = "spi";
+			groups = "spi0", "spi0_wp_hold";
+		};
+	};
+
+	spic_pins: spic-pins {
+		mux {
+			function = "spi";
+			groups = "spi1_2";
+		};
+	};
+
  	uart1_pins: uart1-pins {
  		mux {
  			function = "uart";
@@ -105,6 +119,27 @@ conf {
  	};
  };
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi_flash_pins>;
+	cs-gpios = <0>, <0>;
+	status = "okay";
+	spi_nand: spi_nand@0 {
+		compatible = "spi-nand";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+		spi-tx-buswidth = <4>;
+		spi-rx-buswidth = <4>;
+	};
+};
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spic_pins>;
+	cs-gpios = <0>, <0>;
+	status = "okay";
+};
+
  &switch {
  	ports {
  		#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
index afc01abfa99c..29da9b8ed753 100644
--- a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
@@ -253,6 +253,34 @@ i2c0: i2c@11008000 {
  			status = "disabled";
  		};
+ spi0: spi@1100a000 {
+			compatible = "mediatek,mt7986-spi-ipm", "mediatek,spi-ipm";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x1100a000 0 0x100>;
+			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&topckgen CLK_TOP_MPLL_D2>,
+				 <&topckgen CLK_TOP_SPI_SEL>,
+				 <&infracfg CLK_INFRA_SPI0_CK>,
+				 <&infracfg CLK_INFRA_SPI0_HCK_CK>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk", "hclk";
+			status = "disabled";
+		};
+
+		spi1: spi@1100b000 {
+			compatible = "mediatek,mt7986-spi-ipm", "mediatek,spi-ipm";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x1100b000 0 0x100>;
+			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&topckgen CLK_TOP_MPLL_D2>,
+				 <&topckgen CLK_TOP_SPIM_MST_SEL>,
+				 <&infracfg CLK_INFRA_SPI1_CK>,
+				 <&infracfg CLK_INFRA_SPI1_HCK_CK>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk", "hclk";
+			status = "disabled";
+		};
+
  		ethsys: syscon@15000000 {
  			 #address-cells = <1>;
  			 #size-cells = <1>;
diff --git a/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts b/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
index 79c5c78f7a14..2c7f1d4fb352 100644
--- a/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
@@ -100,6 +100,20 @@ fixed-link {
  };
&pio {
+	spi_flash_pins: spi-flash-pins {
+		mux {
+			function = "spi";
+			groups = "spi0", "spi0_wp_hold";
+		};
+	};
+
+	spic_pins: spic-pins {
+		mux {
+			function = "spi";
+			groups = "spi1_2";
+		};
+	};
+
  	wf_2g_5g_pins: wf-2g-5g-pins {
  		mux {
  			function = "wifi";
@@ -132,6 +146,27 @@ conf {
  	};
  };
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi_flash_pins>;
+	cs-gpios = <0>, <0>;
+	status = "okay";
+	spi_nand: spi_nand@0 {
+		compatible = "spi-nand";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+		spi-tx-buswidth = <4>;
+		spi-rx-buswidth = <4>;
+	};
+};
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spic_pins>;
+	cs-gpios = <0>, <0>;
+	status = "okay";
+};
+
  &uart0 {
  	status = "okay";
  };



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux