Hi all, This patch set adds support for the TI TMAG5273 Low-Power Linear 3D Hall- Effect Sensor. Additionally to temperature and magnetic X, Y and Z-axes the angle and magnitude are reported. The sensor is operating in continuous measurement mode and changes to sleep mode if not used for 5 seconds. Tests were done on a ROCK3 Model A board using the TMAG5273 evaluation module. Changes in v2: Thanks to Krzysztof, Andy and Jonathan for your detailed review and explanations on the first version. This patch includes all your suggestions and some additional cleanup in the probe function. Gerald Loacker (2): dt-bindings: iio: magnetometer: add ti tmag5273 documentation file iio: magnetometer: add ti tmag5273 driver .../iio/magnetometer/ti,tmag5273.yaml | 75 ++ MAINTAINERS | 7 + drivers/iio/magnetometer/Kconfig | 12 + drivers/iio/magnetometer/Makefile | 2 + drivers/iio/magnetometer/tmag5273.c | 725 ++++++++++++++++++ 5 files changed, 821 insertions(+) create mode 100644 .../bindings/iio/magnetometer/ti,tmag5273.yaml create mode 100644 drivers/iio/magnetometer/tmag5273.c -- 2.37.2
