Add common fan properties bindings to a schema. Bindings for fan controllers can reference the common schema for the fan child nodes: patternProperties: "^fan@[0-2]": type: object $ref: fan-common.yaml# Signed-off-by: Naresh Solanki <Naresh.Solanki@xxxxxxxxxxxxx> --- .../devicetree/bindings/hwmon/fan-common.yaml | 47 +++++++++++++++++++ 1 file changed, 47 insertions(+) create mode 100644 Documentation/devicetree/bindings/hwmon/fan-common.yaml diff --git a/Documentation/devicetree/bindings/hwmon/fan-common.yaml b/Documentation/devicetree/bindings/hwmon/fan-common.yaml new file mode 100644 index 000000000000..0535d37624cc --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/fan-common.yaml @@ -0,0 +1,47 @@ +# SPDX-License-Identifier: GPL-2.0-or-later OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/fan-common.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Common fan properties + +maintainers: + - Naresh Solanki <naresh.solanki@xxxxxxxxxxxxx> + +properties: + max-rpm: + description: + Max RPM supported by fan. + $ref: /schemas/types.yaml#/definitions/uint32 + + min-rpm: + description: + Min RPM supported by fan. + $ref: /schemas/types.yaml#/definitions/uint32 + + pulses-per-revolution: + description: + The number of pulse from fan sensor per revolution. + $ref: /schemas/types.yaml#/definitions/uint32 + + target-rpm: + description: + Target RPM the fan should be configured during driver probe. + $ref: /schemas/types.yaml#/definitions/uint32 + + pwms: + description: + PWM provider. + + label: + description: + Optional fan label + + fan-supply: + description: + Power supply for fan. + +additionalProperties: true + +... -- 2.37.3