The sc7180 phy compatible works fine for some cases, but it turns out
sm6350 does need proper phy configuration in the driver, so use the
newly added sm6350 compatible.
This fixes qmpphy init when no USB cable is plugged in during bootloader
stage.
Signed-off-by: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sm6350.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi
index 7ccbb8f437fa..1cbc73e5f10e 100644
--- a/arch/arm64/boot/dts/qcom/sm6350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi
@@ -1342,7 +1342,7 @@ usb_1_hsphy: phy@88e3000 {
};
usb_1_qmpphy: phy@88e9000 {
- compatible = "qcom,sc7180-qmp-usb3-dp-phy";
+ compatible = "qcom,sm6350-qmp-usb3-dp-phy";
reg = <0 0x088e9000 0 0x200>,
<0 0x088e8000 0 0x40>,
<0 0x088ea000 0 0x200>;
--
2.38.1
