On Tue, Oct 28, 2014 at 03:27:52PM -0700, Andrew Bresticker wrote:
[...]
> diff --git a/Documentation/devicetree/bindings/usb/nvidia,tegra124-xhci.txt b/Documentation/devicetree/bindings/usb/nvidia,tegra124-xhci.txt
[...]
> + - pll_u_480m
> + - clk_m
> + - pll_e
What are these used for? I guess I'll see when I get to the driver
patch.
> +Optional properties:
> +--------------------
> + - phys: Must contain an entry for each entry in phy-names.
> + See ../phy/phy-bindings.txt for details.
> + - phy-names: Should include an entry for each PHY used by the controller.
> + May be a subset of the following:
> + - utmi-{0,1,2}
> + - hsic-{0,1}
> + - usb3-{0,1}
> + - avddio-pex-supply: PCIe/USB3 analog logic power supply. Must supply 1.05V.
> + - dvddio-pex-supply: PCIe/USB3 digital logic power supply. Must supply 1.05V.
> + - avdd-usb-supply: USB controller power supply. Must supply 3.3V.
> + - avdd-pll-utmip-supply: UTMI PLL power supply. Must supply 1.8V.
> + - avdd-pll-erefe-supply: PLLE reference PLL power supply. Must supply 1.05V.
> + - avdd-pex-pll-supply: PCIe/USB3 PLL power supply. Must supply 1.05V.
> + - hvdd-pex-supply: High-voltage PCIe/USB3 power supply. Must supply 3.3V.
> + - hvdd-pex-plle-supply: High-voltage PLLE power supply. Must supply 3.3V.
I think the name for this in the documentation is HVDD_PEX_PLL_E, which
would translate to hvdd-pex-pll-e. At least that's how we named this
supply for PCIe.
Alternatively it seems like there are aliases for the USB 3.0 related
supplies:
avdd-pex-pll -> avdd-usb-ss-pll
hvdd-pex -> hvdd-usb-ss
hvdd-pex-pll-e -> hvdd-usb-ss-pll-e
So perhaps these could be used for the XHCI driver instead? Also, should
these supplies not be mandatory?
Thierry
Attachment:
pgpGs1bNo3HZx.pgp
Description: PGP signature
