[PATCH v2 9/9] arm64: dts: qcom: sdm632: Add device tree for Motorola G7 Power

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Gabriela David <ultracoolguy@xxxxxxxxxxx>

Add device tree for the Motorola G7 Power (ocean) smartphone. This
device is based on Snapdragon 632 (sdm632) SoC which is a variant of
MSM8953.

Signed-off-by: Gabriela David <ultracoolguy@xxxxxxxxxxx>
Signed-off-by: Luca Weiss <luca@xxxxxxxxx>
---
Changes in v2:
* address review comments from v1

 arch/arm64/boot/dts/qcom/Makefile             |   1 +
 .../boot/dts/qcom/sdm632-motorola-ocean.dts   | 291 ++++++++++++++++++
 2 files changed, 292 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/sdm632-motorola-ocean.dts

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 817738043ebd..dda4bd773142 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -131,6 +131,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= sdm630-sony-xperia-nile-discovery.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm630-sony-xperia-nile-pioneer.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm630-sony-xperia-nile-voyager.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm632-fairphone-fp3.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sdm632-motorola-ocean.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm636-sony-xperia-ganges-mermaid.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm660-xiaomi-lavender.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm670-google-sargo.dtb
diff --git a/arch/arm64/boot/dts/qcom/sdm632-motorola-ocean.dts b/arch/arm64/boot/dts/qcom/sdm632-motorola-ocean.dts
new file mode 100644
index 000000000000..380a0c49a141
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm632-motorola-ocean.dts
@@ -0,0 +1,291 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Gabriela David
+ */
+/dts-v1/;
+
+#include "sdm632.dtsi"
+#include "pm8953.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/delete-node/ &cont_splash_mem;
+/delete-node/ &qseecom_mem;
+
+/ {
+	model = "Motorola G7 Power";
+	compatible = "motorola,ocean", "qcom,sdm632";
+	chassis-type = "handset";
+	qcom,msm-id = <349 0>;
+	qcom,board-id = <0x141 0xc100>;
+	qcom,pmic-id = <0x10016 0x25 0x00 0x00>;
+
+	backlight: backlight {
+		compatible = "led-backlight";
+		leds = <&led>;
+	};
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		framebuffer@90001000 {
+			compatible = "simple-framebuffer";
+			reg = <0 0x90001000 0 (720 * 1520 * 3)>;
+
+			width = <720>;
+			height = <1520>;
+			stride = <(720 * 3)>;
+			format = "r8g8b8";
+
+			power-domains = <&gcc MDSS_GDSC>;
+
+			clocks = <&gcc GCC_MDSS_AHB_CLK>,
+				 <&gcc GCC_MDSS_AXI_CLK>,
+				 <&gcc GCC_MDSS_VSYNC_CLK>,
+				 <&gcc GCC_MDSS_MDP_CLK>,
+				 <&gcc GCC_MDSS_BYTE0_CLK>,
+				 <&gcc GCC_MDSS_PCLK0_CLK>,
+				 <&gcc GCC_MDSS_ESC0_CLK>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_key_default>;
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&tlmm 85 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+
+	reserved-memory {
+		qseecom_mem: qseecom@84300000 {
+			reg = <0x0 0x84300000 0x0 0x2000000>;
+			no-map;
+		};
+
+		cont_splash_mem: cont-splash@90001000 {
+			reg = <0x0 0x90001000 0x0 (720 * 1520 * 3)>;
+			no-map;
+		};
+
+		reserved@eefa1800 {
+			reg = <0x00 0xeefa1800 0x00 0x5e800>;
+			no-map;
+		};
+
+		ramoops@ef000000 {
+			compatible = "ramoops";
+			reg = <0x0 0xef000000 0x0 0xbf800>;
+			console-size = <0x40000>;
+			pmsg-size = <0x40000>;
+			record-size = <0x3f800>;
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&hsusb_phy {
+	vdd-supply = <&pm8953_l3>;
+	vdda-pll-supply = <&pm8953_l7>;
+	vdda-phy-dpdm-supply = <&pm8953_l13>;
+
+	status = "okay";
+};
+
+&i2c_3 {
+	status = "okay";
+
+	touchscreen@41 {
+		compatible = "ilitek,ili2117";
+		reg = <0x41>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <65 IRQ_TYPE_EDGE_FALLING>;
+
+		touchscreen-inverted-x;
+	};
+};
+
+&i2c_5 {
+	status = "okay";
+
+	led-controller@36 {
+		compatible = "ti,lm3697";
+		reg = <0x36>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led: led@1 {
+			reg = <1>;
+			default-trigger = "backlight";
+			function = LED_FUNCTION_BACKLIGHT;
+			led-sources = <0 1 2>;
+		};
+	};
+};
+
+&pm8953_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators {
+		compatible = "qcom,rpm-pm8953-regulators";
+
+		vdd_l1-supply = <&pm8953_s3>;
+		vdd_l2_l3-supply = <&pm8953_s3>;
+		vdd_l4_l5_l6_l7_l16_l19-supply = <&pm8953_s4>;
+		vdd_l8_l11_l12_l13_l14_l15-supply = <&vph_pwr>;
+		vdd_l9_l10_l17_l18_l22-supply = <&vph_pwr>;
+
+		pm8953_s3: s3 {
+			regulator-min-microvolt = <984000>;
+			regulator-max-microvolt = <1240000>;
+		};
+
+		pm8953_s4: s4 {
+			regulator-min-microvolt = <1036000>;
+			regulator-max-microvolt = <2040000>;
+		};
+
+		pm8953_l1: l1 {
+			regulator-min-microvolt = <975000>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		pm8953_l2: l2 {
+			regulator-min-microvolt = <975000>;
+			regulator-max-microvolt = <1175000>;
+		};
+
+		pm8953_l3: l3 {
+			regulator-min-microvolt = <925000>;
+			regulator-max-microvolt = <925000>;
+			regulator-allow-set-load;
+		};
+
+		pm8953_l5: l5 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8953_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		pm8953_l7: l7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1900000>;
+		};
+
+		pm8953_l8: l8 {
+			regulator-min-microvolt = <2900000>;
+			regulator-max-microvolt = <2900000>;
+		};
+
+		pm8953_l9: l9 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		pm8953_l10: l10 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm8953_l11: l11 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8953_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8953_l13: l13 {
+			regulator-min-microvolt = <3125000>;
+			regulator-max-microvolt = <3125000>;
+		};
+
+		pm8953_l16: l16 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8953_l17: l17 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pm8953_l18: l18 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2700000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		pm8953_l19: l19 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1350000>;
+		};
+
+		pm8953_l22: l22 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		pm8953_l23: l23 {
+			regulator-min-microvolt = <975000>;
+			regulator-max-microvolt = <1225000>;
+		};
+	};
+};
+
+&sdhc_1 {
+	vmmc-supply = <&pm8953_l8>;
+	vqmmc-supply = <&pm8953_l5>;
+
+	status = "okay";
+};
+
+&sdhc_2 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
+	pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
+
+	vmmc-supply = <&pm8953_l11>;
+	vqmmc-supply = <&pm8953_l12>;
+
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <96 4>;
+};
+
+&usb3 {
+	status = "okay";
+};
+
+&usb3_dwc3 {
+	dr_mode = "peripheral";
+};
-- 
2.38.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux