[PATCH v4 4/8] phy: qcom-qmp-pcie: split sm8450 gen3 PHY config tables

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



SM8350 PHY config tables are mostly the same as SM8450 gen3 PHY config
tables. Split these tables to be used by SM8350 config.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
 drivers/phy/qualcomm/phy-qcom-qmp-pcie.c | 26 ++++++++++++++++++------
 1 file changed, 20 insertions(+), 6 deletions(-)

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
index 47cccc4b35b2..d9f8dffbe1da 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
@@ -1252,7 +1252,6 @@ static const struct qmp_phy_init_tbl sm8450_qmp_gen3x1_pcie_serdes_tbl[] = {
 	QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE1_MODE0, 0xca),
 	QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE2_MODE1, 0x18),
 	QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE1_MODE1, 0xa2),
-	QMP_PHY_INIT_CFG(QSERDES_V5_COM_SYSCLK_BUF_ENABLE, 0x07),
 	QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_EN_CENTER, 0x01),
 	QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_PER1, 0x31),
 	QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_PER2, 0x01),
@@ -1263,6 +1262,10 @@ static const struct qmp_phy_init_tbl sm8450_qmp_gen3x1_pcie_serdes_tbl[] = {
 	QMP_PHY_INIT_CFG(QSERDES_V5_COM_CLK_ENABLE1, 0x90),
 };
 
+static const struct qmp_phy_init_tbl sm8450_qmp_gen3x1_pcie_rc_serdes_tbl[] = {
+	QMP_PHY_INIT_CFG(QSERDES_V5_COM_SYSCLK_BUF_ENABLE, 0x07),
+};
+
 static const struct qmp_phy_init_tbl sm8450_qmp_gen3x1_pcie_tx_tbl[] = {
 	QMP_PHY_INIT_CFG(QSERDES_V5_TX_PI_QEC_CTRL, 0x20),
 	QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_1, 0x75),
@@ -1274,8 +1277,6 @@ static const struct qmp_phy_init_tbl sm8450_qmp_gen3x1_pcie_tx_tbl[] = {
 static const struct qmp_phy_init_tbl sm8450_qmp_gen3x1_pcie_rx_tbl[] = {
 	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_LOW, 0x7f),
 	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH, 0xff),
-	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH2, 0xbf),
-	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH3, 0x3f),
 	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH4, 0xd8),
 	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_LOW, 0xdc),
 	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH, 0xdc),
@@ -1283,14 +1284,19 @@ static const struct qmp_phy_init_tbl sm8450_qmp_gen3x1_pcie_rx_tbl[] = {
 	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH3, 0x34),
 	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH4, 0xa6),
 	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_10_HIGH3, 0x34),
-	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_10_HIGH4, 0x38),
-	QMP_PHY_INIT_CFG(QSERDES_V5_RX_VGA_CAL_CNTRL2, 0x07),
 	QMP_PHY_INIT_CFG(QSERDES_V5_RX_GM_CAL, 0x00),
 	QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_THRESH1, 0x08),
 	QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_THRESH2, 0x08),
-	QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_PI_CONTROLS, 0xf0),
 	QMP_PHY_INIT_CFG(QSERDES_V5_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
 	QMP_PHY_INIT_CFG(QSERDES_V5_RX_TX_ADAPT_POST_THRESH, 0xf0),
+};
+
+static const struct qmp_phy_init_tbl sm8450_qmp_gen3x1_pcie_rc_rx_tbl[] = {
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH2, 0xbf),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH3, 0x3f),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_10_HIGH4, 0x38),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_VGA_CAL_CNTRL2, 0x07),
+	QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_PI_CONTROLS, 0xf0),
 	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL4, 0x07),
 	QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FO_GAIN, 0x09),
 	QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SO_GAIN, 0x05),
@@ -2030,6 +2036,14 @@ static const struct qmp_phy_cfg sm8450_qmp_gen3x1_pciephy_cfg = {
 		.pcs_misc	= sm8450_qmp_gen3x1_pcie_pcs_misc_tbl,
 		.pcs_misc_num	= ARRAY_SIZE(sm8450_qmp_gen3x1_pcie_pcs_misc_tbl),
 	},
+
+	.tbls_rc = &(const struct qmp_phy_cfg_tbls) {
+		.serdes		= sm8450_qmp_gen3x1_pcie_rc_serdes_tbl,
+		.serdes_num	= ARRAY_SIZE(sm8450_qmp_gen3x1_pcie_rc_serdes_tbl),
+		.rx		= sm8450_qmp_gen3x1_pcie_rc_rx_tbl,
+		.rx_num		= ARRAY_SIZE(sm8450_qmp_gen3x1_pcie_rc_rx_tbl),
+	},
+
 	.clk_list		= sdm845_pciephy_clk_l,
 	.num_clks		= ARRAY_SIZE(sdm845_pciephy_clk_l),
 	.reset_list		= sdm845_pciephy_reset_l,
-- 
2.35.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux