Re: [PATCH v6 11/11] arm64: dts: mt7986: add BPI-R3 nand/nor overlays

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Nov 18, 2022 at 1:01 PM Frank Wunderlich <linux@xxxxxxxxx> wrote:
>
> From: Frank Wunderlich <frank-w@xxxxxxxxxxxxxxx>
>
> Add devicetree overlays for using nand and nor on BPI-R3.

Can you not tell at runtime which one you booted from? If not, how
does one choose which overlay to apply? If you can, why not populate
both nodes and enable the right one? IMO, if all h/w is present, it
should all be in the DT. Selecting what h/w to use is a separate
problem and overlays aren't a great solution for that.


> Signed-off-by: Frank Wunderlich <frank-w@xxxxxxxxxxxxxxx>
> ---
> maybe rename to dtso?
>
> "kbuild: Allow DTB overlays to built from .dtso named source files"
> https://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git/commit/?h=dt/next&id=363547d2191cbc32ca954ba75d72908712398ff2
>
> more comments about the dt overlay-support:
>
> https://patchwork.kernel.org/comment/25092116/
> https://patchwork.kernel.org/comment/25085681/
> ---
> v4:
> - drop compile-comment from overlays
> - add author-information to dt-overlays
> ---
>  arch/arm64/boot/dts/mediatek/Makefile         |  2 +
>  .../mediatek/mt7986a-bananapi-bpi-r3-nand.dts | 55 +++++++++++++++
>  .../mediatek/mt7986a-bananapi-bpi-r3-nor.dts  | 69 +++++++++++++++++++
>  3 files changed, 126 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-nand.dts
>  create mode 100644 arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-nor.dts
>
> diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
> index e8902f2cc58f..d42208c4090d 100644
> --- a/arch/arm64/boot/dts/mediatek/Makefile
> +++ b/arch/arm64/boot/dts/mediatek/Makefile
> @@ -8,6 +8,8 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-x20-dev.dtb
>  dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-rfb1.dtb
>  dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-bananapi-bpi-r64.dtb
>  dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-emmc.dtb
> +dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-nand.dtbo
> +dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-nor.dtbo

These need rules to apply them to the base dtb(s). You just need:

full.dtb := base.dtb overlay.dtb
dtb-y += full.dtb

Rob



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux