From: Jianlong Huang <jianlong.huang@xxxxxxxxxxxxxxxx> Add pinctrl bindings for StarFive JH7110 SoC aon pinctrl controller. Signed-off-by: Jianlong Huang <jianlong.huang@xxxxxxxxxxxxxxxx> Signed-off-by: Hal Feng <hal.feng@xxxxxxxxxxxxxxxx> --- .../pinctrl/starfive,jh7110-aon-pinctrl.yaml | 134 ++++++++++++++++++ 1 file changed, 134 insertions(+) create mode 100644 Documentation/devicetree/bindings/pinctrl/starfive,jh7110-aon-pinctrl.yaml diff --git a/Documentation/devicetree/bindings/pinctrl/starfive,jh7110-aon-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/starfive,jh7110-aon-pinctrl.yaml new file mode 100644 index 000000000000..1dd000e1f614 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/starfive,jh7110-aon-pinctrl.yaml @@ -0,0 +1,134 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/starfive,jh7110-aon-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: StarFive JH7110 Aon Pin Controller + +description: | + Bindings for the JH7110 RISC-V SoC from StarFive Technology Ltd. + + Out of the SoC's many pins only the ones named PAD_GPIO0 to PAD_GPIO4 + can be multiplexed and have configurable bias, drive strength, + schmitt trigger etc. + Some peripherals have their I/O go through the 4 "GPIOs". This also + includes PWM. + +maintainers: + - Jianlong Huang <jianlong.huang@xxxxxxxxxxxxxxxx> + +properties: + compatible: + const: starfive,jh7110-aon-pinctrl + + reg: + maxItems: 1 + + reg-names: + items: + - const: control + + clocks: + maxItems: 1 + + resets: + maxItems: 1 + + gpio-controller: true + + "#gpio-cells": + const: 2 + + interrupts: + maxItems: 1 + description: The GPIO parent interrupt. + + interrupt-controller: true + + "#interrupt-cells": + const: 2 + +required: + - compatible + - reg + - reg-names + - gpio-controller + - "#gpio-cells" + - interrupts + - interrupt-controller + - "#interrupt-cells" + +patternProperties: + '-[0-9]+$': + type: object + patternProperties: + '-pins$': + type: object + description: | + A pinctrl node should contain at least one subnode representing the + pinctrl groups available on the machine. Each subnode will list the + pins it needs, and how they should be configured, with regard to + muxer configuration, system signal configuration, pin groups for + vin/vout module, pin voltage, mux functions for output, mux functions + for output enable, mux functions for input. + + properties: + pinmux: + description: | + The list of GPIOs and their mux settings that properties in the + node apply to. This should be set using the GPIOMUX macro. + $ref: "/schemas/pinctrl/pinmux-node.yaml#/properties/pinmux" + + bias-disable: true + + bias-pull-up: + type: boolean + + bias-pull-down: + type: boolean + + drive-strength: + enum: [ 2, 4, 8, 12 ] + + input-enable: true + + input-disable: true + + input-schmitt-enable: true + + input-schmitt-disable: true + + slew-rate: + maximum: 1 + + additionalProperties: false + + additionalProperties: false + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/starfive-jh7110.h> + #include <dt-bindings/reset/starfive-jh7110.h> + #include <dt-bindings/pinctrl/pinctrl-starfive-jh7110.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + gpioa: gpio@17020000 { + compatible = "starfive,jh7110-aon-pinctrl"; + reg = <0x0 0x17020000 0x0 0x10000>; + reg-names = "control"; + resets = <&aoncrg_rst JH7110_AONRST_AON_IOMUX>; + interrupts = <85>; + interrupt-controller; + #interrupt-cells = <2>; + #gpio-cells = <2>; + gpio-controller; + }; + }; + +... -- 2.38.1
