Add description for new property ti,led-modes in binding file.
Signed-off-by: Tim Harvey <tharvey@xxxxxxxxxxxxx>
---
.../devicetree/bindings/net/ti,dp83867.yaml | 6 ++++++
include/dt-bindings/net/ti-dp83867.h | 16 ++++++++++++++++
2 files changed, 22 insertions(+)
diff --git a/Documentation/devicetree/bindings/net/ti,dp83867.yaml b/Documentation/devicetree/bindings/net/ti,dp83867.yaml
index b8c0e4b5b494..8b84c34d389f 100644
--- a/Documentation/devicetree/bindings/net/ti,dp83867.yaml
+++ b/Documentation/devicetree/bindings/net/ti,dp83867.yaml
@@ -118,6 +118,12 @@ properties:
Transmitt FIFO depth- see dt-bindings/net/ti-dp83867.h for applicable
values.
+ ti,led-modes:
+ description: |
+ List of LED modes - see dt-bindings/net/ti-dp83867.h for applicable
+ values.
+ $ref: schemas/types.yaml#/definitions/uint32-array
+
required:
- reg
diff --git a/include/dt-bindings/net/ti-dp83867.h b/include/dt-bindings/net/ti-dp83867.h
index 6fc4b445d3a1..ea3e17b27427 100644
--- a/include/dt-bindings/net/ti-dp83867.h
+++ b/include/dt-bindings/net/ti-dp83867.h
@@ -50,4 +50,20 @@
#define DP83867_CLK_O_SEL_REF_CLK 0xC
/* Special flag to indicate clock should be off */
#define DP83867_CLK_O_SEL_OFF 0xFFFFFFFF
+
+/* LED_CFG - LED configuration selection */
+#define DP83867_LED_SEL_LINK 0
+#define DP83867_LED_SEL_ACT 1
+#define DP83867_LED_SEL_ACT_TX 2
+#define DP83867_LED_SEL_ACT_RX 3
+#define DP83867_LED_SEL_COL 4
+#define DP83867_LED_SEL_LINK_1000BT 5
+#define DP83867_LED_SEL_LINK_100BT 6
+#define DP83867_LED_SEL_LINK_10BT 7
+#define DP83867_LED_SEL_LINK_10_100BT 8
+#define DP83867_LED_SEL_LINK_100_1000BT 9
+#define DP83867_LED_SEL_FULL_DUPLEX 10
+#define DP83867_LED_SEL_LINK_ACT 11
+#define DP83867_LED_SEL_ERR_TX_RX 13
+#define DP83867_LED_SEL_ERR_RX 14
#endif
--
2.25.1
