[PATCH v1 2/8] dt-bindings: display: bridge: renesas,dsi-csi2-tx: Add r8a779g0

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Tomi Valkeinen <tomi.valkeinen+renesas@xxxxxxxxxxxxxxxx>

Extend the Renesas DSI display bindings to support the r8a779g0 V4H.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@xxxxxxxxxxxxxxxx>
---
 .../bindings/display/bridge/renesas,dsi-csi2-tx.yaml           | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,dsi-csi2-tx.yaml b/Documentation/devicetree/bindings/display/bridge/renesas,dsi-csi2-tx.yaml
index afeeb967393d..bc3101f77e5a 100644
--- a/Documentation/devicetree/bindings/display/bridge/renesas,dsi-csi2-tx.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/renesas,dsi-csi2-tx.yaml
@@ -11,13 +11,14 @@ maintainers:
 
 description: |
   This binding describes the MIPI DSI/CSI-2 encoder embedded in the Renesas
-  R-Car V3U SoC. The encoder can operate in either DSI or CSI-2 mode, with up
+  R-Car V3U/V4H SoC. The encoder can operate in either DSI or CSI-2 mode, with up
   to four data lanes.
 
 properties:
   compatible:
     enum:
       - renesas,r8a779a0-dsi-csi2-tx    # for V3U
+      - renesas,r8a779g0-dsi-csi2-tx    # for V4H
 
   reg:
     maxItems: 1
-- 
2.34.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux