Re: [PATCH v10 2/2] dmaengine: imx-sdma: support hdmi in sdma

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Nov 15, 2022 at 05:38:23PM +0800, Joy Zou wrote:
> The hdmi script already supported in sdma firmware. So add support hdmi
> in sdma driver.
> 
> The design of hdmi script is different from common script such as sai.
> There is no need to config buffer descriptor for HDMI. The cyclic
> capability is achieved by the hdmi script. The slave config is so simple,
> only config src_addr, dts_addr and direction DMA_TRANS_NONE.
> 
> Signed-off-by: Joy Zou <joy.zou@xxxxxxx>

Reviewed-by: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>

Sascha

> ---
> Changes in v7:
>     modify the commit message.
> ---
>  drivers/dma/imx-sdma.c      | 38 +++++++++++++++++++++++++++++--------
>  include/linux/dma/imx-dma.h |  1 +
>  2 files changed, 31 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c
> index fbea5f62dd98..ab877ceeac3f 100644
> --- a/drivers/dma/imx-sdma.c
> +++ b/drivers/dma/imx-sdma.c
> @@ -954,7 +954,10 @@ static irqreturn_t sdma_int_handler(int irq, void *dev_id)
>  		desc = sdmac->desc;
>  		if (desc) {
>  			if (sdmac->flags & IMX_DMA_SG_LOOP) {
> -				sdma_update_channel_loop(sdmac);
> +				if (sdmac->peripheral_type != IMX_DMATYPE_HDMI)
> +					sdma_update_channel_loop(sdmac);
> +				else
> +					vchan_cyclic_callback(&desc->vd);
>  			} else {
>  				mxc_sdma_handle_channel_normal(sdmac);
>  				vchan_cookie_complete(&desc->vd);
> @@ -1074,6 +1077,10 @@ static int sdma_get_pc(struct sdma_channel *sdmac,
>  		per_2_emi = sdma->script_addrs->sai_2_mcu_addr;
>  		emi_2_per = sdma->script_addrs->mcu_2_sai_addr;
>  		break;
> +	case IMX_DMATYPE_HDMI:
> +		emi_2_per = sdma->script_addrs->hdmi_dma_addr;
> +		sdmac->is_ram_script = true;
> +		break;
>  	default:
>  		dev_err(sdma->dev, "Unsupported transfer type %d\n",
>  			peripheral_type);
> @@ -1125,11 +1132,16 @@ static int sdma_load_context(struct sdma_channel *sdmac)
>  	/* Send by context the event mask,base address for peripheral
>  	 * and watermark level
>  	 */
> -	context->gReg[0] = sdmac->event_mask[1];
> -	context->gReg[1] = sdmac->event_mask[0];
> -	context->gReg[2] = sdmac->per_addr;
> -	context->gReg[6] = sdmac->shp_addr;
> -	context->gReg[7] = sdmac->watermark_level;
> +	if (sdmac->peripheral_type == IMX_DMATYPE_HDMI) {
> +		context->gReg[4] = sdmac->per_addr;
> +		context->gReg[6] = sdmac->shp_addr;
> +	} else {
> +		context->gReg[0] = sdmac->event_mask[1];
> +		context->gReg[1] = sdmac->event_mask[0];
> +		context->gReg[2] = sdmac->per_addr;
> +		context->gReg[6] = sdmac->shp_addr;
> +		context->gReg[7] = sdmac->watermark_level;
> +	}
>  
>  	bd0->mode.command = C0_SETDM;
>  	bd0->mode.status = BD_DONE | BD_WRAP | BD_EXTD;
> @@ -1513,7 +1525,7 @@ static struct sdma_desc *sdma_transfer_init(struct sdma_channel *sdmac,
>  	desc->sdmac = sdmac;
>  	desc->num_bd = bds;
>  
> -	if (sdma_alloc_bd(desc))
> +	if (bds && sdma_alloc_bd(desc))
>  		goto err_desc_out;
>  
>  	/* No slave_config called in MEMCPY case, so do here */
> @@ -1678,13 +1690,16 @@ static struct dma_async_tx_descriptor *sdma_prep_dma_cyclic(
>  {
>  	struct sdma_channel *sdmac = to_sdma_chan(chan);
>  	struct sdma_engine *sdma = sdmac->sdma;
> -	int num_periods = buf_len / period_len;
> +	int num_periods = 0;
>  	int channel = sdmac->channel;
>  	int i = 0, buf = 0;
>  	struct sdma_desc *desc;
>  
>  	dev_dbg(sdma->dev, "%s channel: %d\n", __func__, channel);
>  
> +	if (sdmac->peripheral_type != IMX_DMATYPE_HDMI)
> +		num_periods = buf_len / period_len;
> +
>  	sdma_config_write(chan, &sdmac->slave_config, direction);
>  
>  	desc = sdma_transfer_init(sdmac, direction, num_periods);
> @@ -1701,6 +1716,9 @@ static struct dma_async_tx_descriptor *sdma_prep_dma_cyclic(
>  		goto err_bd_out;
>  	}
>  
> +	if (sdmac->peripheral_type == IMX_DMATYPE_HDMI)
> +		return vchan_tx_prep(&sdmac->vc, &desc->vd, flags);
> +
>  	while (buf < buf_len) {
>  		struct sdma_buffer_descriptor *bd = &desc->bd[i];
>  		int param;
> @@ -1761,6 +1779,10 @@ static int sdma_config_write(struct dma_chan *chan,
>  		sdmac->watermark_level |= (dmaengine_cfg->dst_maxburst << 16) &
>  			SDMA_WATERMARK_LEVEL_HWML;
>  		sdmac->word_size = dmaengine_cfg->dst_addr_width;
> +	} else if (sdmac->peripheral_type == IMX_DMATYPE_HDMI) {
> +		sdmac->per_address = dmaengine_cfg->dst_addr;
> +		sdmac->per_address2 = dmaengine_cfg->src_addr;
> +		sdmac->watermark_level = 0;
>  	} else {
>  		sdmac->per_address = dmaengine_cfg->dst_addr;
>  		sdmac->watermark_level = dmaengine_cfg->dst_maxburst *
> diff --git a/include/linux/dma/imx-dma.h b/include/linux/dma/imx-dma.h
> index f487a4fa103a..cfec5f946e23 100644
> --- a/include/linux/dma/imx-dma.h
> +++ b/include/linux/dma/imx-dma.h
> @@ -40,6 +40,7 @@ enum sdma_peripheral_type {
>  	IMX_DMATYPE_ASRC_SP,	/* Shared ASRC */
>  	IMX_DMATYPE_SAI,	/* SAI */
>  	IMX_DMATYPE_MULTI_SAI,	/* MULTI FIFOs For Audio */
> +	IMX_DMATYPE_HDMI,       /* HDMI Audio */
>  };
>  
>  enum imx_dma_prio {
> -- 
> 2.37.1
> 
> 

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux