Re: [PATCH v6 6/7] arm64: dts: qcom: sm8250: camss: Define ports and ports address/size cells

[Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>]

On 16/11/2022 17:28, Bryan O'Donoghue wrote:
> Define the set of possible ports, one for each CSI PHY along with the port
> address and size cells @ the SoC dtsi level.
>
> Suggested-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxx>
> Suggested-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@xxxxxxxxxx>
> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@xxxxxxxxxx>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>

Konrad
>   arch/arm64/boot/dts/qcom/sm8250.dtsi | 29 ++++++++++++++++++++++++++++
>   1 file changed, 29 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
> index d517d6a80bdcb..806aa19ad93ce 100644
> --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
> @@ -3412,6 +3412,35 @@ camss: camss@ac6a000 {
>   					     "cam_hf_0_mnoc",
>   					     "cam_sf_0_mnoc",
>   					     "cam_sf_icp_mnoc";
> +
> +			ports {
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +
> +				port@0 {
> +					reg = <0>;
> +				};
> +
> +				port@1 {
> +					reg = <1>;
> +				};
> +
> +				port@2 {
> +					reg = <2>;
> +				};
> +
> +				port@3 {
> +					reg = <3>;
> +				};
> +
> +				port@4 {
> +					reg = <4>;
> +				};
> +
> +				port@5 {
> +					reg = <5>;
> +				};
> +			};
>   		};
>   
>   		camcc: clock-controller@ad00000 {