On Wed, Nov 16, 2022 at 09:19:30PM +0530, Parikshit Pareek wrote: > Changes in v9: > - Enabled ufs_mem_hc/ufs_mem_phy nodes(John) My name is Johan (below as well). > - Corrected the indentation of 'regulator-allowed-modes' properties. > > Changes in v8: > - Changed the schema of the regulators(Krzysztof) > - Removed node remoteproc_adsp(Andrew) > - Removed TODO comment for node usb_0_dwc3(Andrew) > - Added Reviewed-by/Tested-by(Eric) > > Changes in v7: > - Put the smpi bus related pmic changes in sseparate dtsi files(Konrad) > - Mention allowed regulator modes via DT property regulator-allowed-modes > (Konrad and Brian) > - Remove unused ldo nodes vreg_l3c and vreg_l10c(Shazad) > > Changes in v6: > - Introduced the new dts for the board, rather than moving common nodes > between this one and SA8295 ADP board into dtsi file(Bjorn) > - Drop 'adp' term to imply it being unrelated with ADP board(Internal > discussion with Bjorn) > - Removed Acked-by(Krzysztof) tag in dt-binding document, due to content > change. > - Not including Reviewed-by(Krzysztof), because of the content change. > > Changes in v5: > - Moved the usb and ufs nodes from sa8540p-adp.dtsi file to respective > board specific dts files: sa8295p-adp.dts and sa8540p-adp-ride.dts. > Took inputs from Shazad Hussain in this regard(John) > - Added more description of the board differences(John) > - Not including Reviewed-by for Krzysztof, because of the new changes to > be reviewed. > - Removed Reported-by tag(John). > > Changes in v4: > - Removed the ufs_card_hc node, as it is not mounted on Qdrive-3 board. > - Removed usb_1 relared nodes, as usb1 doesn't have any port connected > on Qdrive3 board. > - Added Reported-by tag for Shazad(for ufs and usb_1 node removals) > > Changes in v3: > - Added Acked-by tag (Krzysztof) > - Renamed dtsi to sa8540p-adp.dtsi (John) > - Removed copyright from sa8295-adp.dts and sa8295-adp.dtsi(John) > - Added cover letter Johan
