Re: [PATCH v3 8/8] arm64: dts: qcom: sm8350-hdk: enable PCIe devices

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Nov 10, 2022 at 09:31:58PM +0300, Dmitry Baryshkov wrote:
> Enable PCIe0 and PCIe1 hosts found on SM8350 HDK board.
> 
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/qcom/sm8350-hdk.dts | 20 ++++++++++++++++++++
>  1 file changed, 20 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
> index 0fcf5bd88fc7..d3c851ec3501 100644
> --- a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
> +++ b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
> @@ -222,6 +222,26 @@ &mpss {
>  	firmware-name = "qcom/sm8350/modem.mbn";
>  };
>  
> +&pcie0 {
> +	status = "okay";
> +};
> +
> +&pcie0_phy {
> +	status = "okay";

The 'status' property should generally go last.

> +	vdda-phy-supply = <&vreg_l5b_0p88>;
> +	vdda-pll-supply = <&vreg_l6b_1p2>;
> +};
> +
> +&pcie1 {
> +	status = "okay";
> +};
> +
> +&pcie1_phy {
> +	status = "okay";

Same here.

> +	vdda-phy-supply = <&vreg_l5b_0p88>;
> +	vdda-pll-supply = <&vreg_l6b_1p2>;
> +};
> +
>  &qupv3_id_0 {
>  	status = "okay";
>  };

Johan



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux