Hi Nícolas,
On 2022-11-02 17:43:00, Nícolas F. R. A. Prado wrote:
> It is possible to run checks on a Devicetree by passing the CHECK_DTBS
> flag when building. This is a useful shortcut to the dtbs_check make
> target since it avoids checking unrelated Devicetrees, which can take
> some time and is unnecessary if no bindings were modified. Document it.
>
> Signed-off-by: Nícolas F. R. A. Prado <nfraprado@xxxxxxxxxxxxx>
>
> ---
>
> Documentation/devicetree/bindings/writing-schema.rst | 7 +++++++
> 1 file changed, 7 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/writing-schema.rst b/Documentation/devicetree/bindings/writing-schema.rst
> index 4a381d20f2b4..55ad556472b4 100644
> --- a/Documentation/devicetree/bindings/writing-schema.rst
> +++ b/Documentation/devicetree/bindings/writing-schema.rst
> @@ -167,6 +167,13 @@ setting the ``DT_SCHEMA_FILES`` variable to a specific schema file or pattern.
> make dt_binding_check DT_SCHEMA_FILES=/gpio/
> make dtbs_check DT_SCHEMA_FILES=trivial-devices.yaml
>
> +Note that ``make dtbs_check`` will validate every DT source file that is
> +enabled. When making changes to a DT but not to the bindings, a possible
> +shortcut to validate only the DT in question is to explicitly build it with
> +the ``CHECK_DTBS`` flag enabled. For example::
> +
> + make CHECK_DTBS=y mediatek/mt8192-evb.dtb
I have a bit of trouble getting this to work on a _clean_ out directory
(perhaps this should have been reported at the original patch, I had
always been using Dmitry's version [1] which didn't suffer from this
problem).
Consider running with the following:
rm out -r
make ARCH=arm64 O=out defconfig
make ARCH=arm64 O=out CHECK_DTBS=y qcom/sm8450-sony-xperia-nagara-pdx223.dtb
After compiling preliminaries, it exits with:
make[3]: *** No rule to make target 'arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara-pdx223.dtb'. Stop.
make[2]: *** [../scripts/Makefile.build:500: arch/arm64/boot/dts/qcom] Error 2
make[1]: *** [/kernel/Makefile:1460: qcom/sm8450-sony-xperia-nagara-pdx223.dtb] Error 2
make[1]: Leaving directory '/kernel/out'
make: *** [Makefile:231: __sub-make] Error 2
However, if I lint all DTBs first by running `dtbs_check`, it seems the
schema preliminaries are built:
LINT Documentation/devicetree/bindings
CHKDT Documentation/devicetree/bindings/processed-schema.json
... bunch of warnings
SCHEMA Documentation/devicetree/bindings/processed-schema.json
And here I ctrl+c the build so that it doesn't run DTC_CHK over every
dts. If I now re-run the original command on my .dtb of choice, it
completes successfully with the warnings that I expect. Is the logic
behind `CHECK_DTBS=y` simply missing a step to make sure SCHEMA is built
and up-to-date?
Aside from not working in a clean output directly, could this imply
schema changes (edits in Documentation/devicetree/bindings) _are not_
propagated when running with `CHECK_DTBS=y?
At the same time running this command twice results in no output the
second time around, supposedly because the dtb has "already been built".
Is that also something we can improve?
[1]: https://lore.kernel.org/linux-arm-msm/20220623144357.297252-1-dmitry.baryshkov@xxxxxxxxxx/
Thanks!
- Marijn
