Re: [PATCH 2/2] arm64: dts: qcom: sm8550-mtp: Add USB PHYs and HC nodes

[Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>]

On 16/11/2022 14:22, Abel Vesa wrote:
> Enable USB HC and PHYs nodes on SM8550 MTP board.
>
> Signed-off-by: Abel Vesa <abel.vesa@xxxxxxxxxx>
> ---
>   arch/arm64/boot/dts/qcom/sm8550-mtp.dts | 22 ++++++++++++++++++++++
>   1 file changed, 22 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts
> index d4c8d5b2497e..757cf4f7f195 100644
> --- a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts
> +++ b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts
> @@ -417,3 +417,25 @@ data-pins {
>   &uart7 {
>   	status = "okay";
>   };
> +
> +&usb_1 {
> +	status = "okay";
> +};
> +
> +&usb_1_dwc3 {
> +	dr_mode = "peripheral";
> +};
> +
> +&usb_1_hsphy {
> +	status = "okay";
Status goes last.

Konrad
> +
> +	vdd-supply = <&vreg_l1e_0p88>;
> +	vdda12-supply = <&vreg_l3e_1p2>;
> +};
> +
> +&usb_1_qmpphy {
> +	status = "okay";
> +
> +	vdda-phy-supply = <&vreg_l3e_1p2>;
> +	vdda-pll-supply = <&vreg_l3f_0p91>;
> +};