Re: [PATCH 2/2] arm64: dts: qcom: sm8550-mtp: Add UFS host controller and PHY node

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 16/11/2022 13:51, Abel Vesa wrote:
Enable UFS host controller and PHY node on SM8550 MTP board.

Signed-off-by: Abel Vesa <abel.vesa@xxxxxxxxxx>
---
  arch/arm64/boot/dts/qcom/sm8550-mtp.dts | 22 ++++++++++++++++++++++
  1 file changed, 22 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts
index d4c8d5b2497e..fef7793a7dec 100644
--- a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts
@@ -417,3 +417,25 @@ data-pins {
  &uart7 {
  	status = "okay";
  };
+
+&ufs_mem_hc {
+	status = "okay";
Status last, please.

+
+	reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>;
+
+	vcc-supply = <&vreg_l17b_2p5>;
+	vcc-max-microamp = <1300000>;
All these -microamp properties are downstream and do not exist in the mainline kernel. Remove them.

Konrad
+	vccq-supply = <&vreg_l1g_1p2>;
+	vccq-max-microamp = <1200000>;
+	vccq2-supply = <&vreg_l3g_1p2>;
+	vccq2-max-microamp = <100>;
+};
+
+&ufs_mem_phy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l1d_0p88>;
+	vdda-phy-max-microamp = <188000>;
+	vdda-pll-supply = <&vreg_l3e_1p2>;
+	vdda-pll-max-microamp = <18300>;
+};



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux