Re: [PATCH 2/2] regulator: qcom-rpmh: Add support for PM8550 regulators

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 16/11/2022 12:05, Abel Vesa wrote:
Add the rpmh regulators found in PM8550 PMIC.
It's a bit more than just PM8550..

The changes look good though, so with the commit message rectified:

Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>

Konrad
They contain FT-SMPS 525s, so add their configuration as well.

Signed-off-by: Abel Vesa <abel.vesa@xxxxxxxxxx>
---
  drivers/regulator/qcom-rpmh-regulator.c | 81 +++++++++++++++++++++++++
  1 file changed, 81 insertions(+)

diff --git a/drivers/regulator/qcom-rpmh-regulator.c b/drivers/regulator/qcom-rpmh-regulator.c
index 4158ff126a67..42c42d17335b 100644
--- a/drivers/regulator/qcom-rpmh-regulator.c
+++ b/drivers/regulator/qcom-rpmh-regulator.c
@@ -731,6 +731,24 @@ static const struct rpmh_vreg_hw_data pmic5_ftsmps520 = {
  	.of_map_mode = rpmh_regulator_pmic4_smps_of_map_mode,
  };
+static const struct rpmh_vreg_hw_data pmic5_ftsmps525_lv = {
+	.regulator_type = VRM,
+	.ops = &rpmh_regulator_vrm_ops,
+	.voltage_range = REGULATOR_LINEAR_RANGE(300000, 0, 267, 4000),
+	.n_voltages = 268,
+	.pmic_mode_map = pmic_mode_map_pmic5_smps,
+	.of_map_mode = rpmh_regulator_pmic4_smps_of_map_mode,
+};
+
+static const struct rpmh_vreg_hw_data pmic5_ftsmps525_mv = {
+	.regulator_type = VRM,
+	.ops = &rpmh_regulator_vrm_ops,
+	.voltage_range = REGULATOR_LINEAR_RANGE(600000, 0, 267, 8000),
+	.n_voltages = 268,
+	.pmic_mode_map = pmic_mode_map_pmic5_smps,
+	.of_map_mode = rpmh_regulator_pmic4_smps_of_map_mode,
+};
+
  static const struct rpmh_vreg_hw_data pmic5_hfsmps515 = {
  	.regulator_type = VRM,
  	.ops = &rpmh_regulator_vrm_ops,
@@ -987,6 +1005,57 @@ static const struct rpmh_vreg_init_data pm8450_vreg_data[] = {
  	{}
  };
+static const struct rpmh_vreg_init_data pm8550_vreg_data[] = {
+	RPMH_VREG("ldo1",   "ldo%s1",  &pmic5_pldo,    "vdd-l1-l4-l10"),
+	RPMH_VREG("ldo2",   "ldo%s2",  &pmic5_pldo,    "vdd-l2-l13-l14"),
+	RPMH_VREG("ldo3",   "ldo%s3",  &pmic5_nldo,    "vdd-l3"),
+	RPMH_VREG("ldo4",   "ldo%s4",  &pmic5_nldo,    "vdd-l1-l4-l10"),
+	RPMH_VREG("ldo5",   "ldo%s5",  &pmic5_pldo,    "vdd-l5-l16"),
+	RPMH_VREG("ldo6",   "ldo%s6",  &pmic5_pldo_lv, "vdd-l6-l7"),
+	RPMH_VREG("ldo7",   "ldo%s7",  &pmic5_pldo_lv, "vdd-l6-l7"),
+	RPMH_VREG("ldo8",   "ldo%s8",  &pmic5_pldo_lv, "vdd-l8-l9"),
+	RPMH_VREG("ldo9",   "ldo%s9",  &pmic5_pldo,    "vdd-l8-l9"),
+	RPMH_VREG("ldo10",  "ldo%s10", &pmic5_nldo,    "vdd-l1-l4-l10"),
+	RPMH_VREG("ldo11",  "ldo%s11", &pmic5_pldo,    "vdd-l11"),
+	RPMH_VREG("ldo12",  "ldo%s12", &pmic5_pldo,    "vdd-l12"),
+	RPMH_VREG("ldo13",  "ldo%s13", &pmic5_pldo,    "vdd-l2-l13-l14"),
+	RPMH_VREG("ldo14",  "ldo%s14", &pmic5_pldo,    "vdd-l2-l13-l14"),
+	RPMH_VREG("ldo15",  "ldo%s15", &pmic5_pldo,    "vdd-l15"),
+	RPMH_VREG("ldo16",  "ldo%s16", &pmic5_pldo,    "vdd-l5-l16"),
+	RPMH_VREG("ldo17",  "ldo%s17", &pmic5_pldo,    "vdd-l17"),
+	RPMH_VREG("bob1",   "bob%s1",  &pmic5_bob,     "vdd-bob1"),
+	RPMH_VREG("bob2",   "bob%s2",  &pmic5_bob,     "vdd-bob2"),
+	{}
+};
+
+static const struct rpmh_vreg_init_data pm8550vs_vreg_data[] = {
+	RPMH_VREG("smps1",  "smp%s1",  &pmic5_ftsmps525_lv, "vdd-s1"),
+	RPMH_VREG("smps2",  "smp%s2",  &pmic5_ftsmps525_lv, "vdd-s2"),
+	RPMH_VREG("smps3",  "smp%s3",  &pmic5_ftsmps525_lv, "vdd-s3"),
+	RPMH_VREG("smps4",  "smp%s4",  &pmic5_ftsmps525_lv, "vdd-s4"),
+	RPMH_VREG("smps5",  "smp%s5",  &pmic5_ftsmps525_lv, "vdd-s5"),
+	RPMH_VREG("smps6",  "smp%s6",  &pmic5_ftsmps525_mv, "vdd-s6"),
+	RPMH_VREG("ldo1",   "ldo%s1",  &pmic5_nldo,   "vdd-l1"),
+	RPMH_VREG("ldo2",   "ldo%s2",  &pmic5_nldo,   "vdd-l2"),
+	RPMH_VREG("ldo3",   "ldo%s3",  &pmic5_nldo,   "vdd-l3"),
+	{}
+};
+
+static const struct rpmh_vreg_init_data pm8550ve_vreg_data[] = {
+	RPMH_VREG("smps1", "smp%s1", &pmic5_ftsmps525_lv, "vdd-s1"),
+	RPMH_VREG("smps2", "smp%s2", &pmic5_ftsmps525_lv, "vdd-s2"),
+	RPMH_VREG("smps3", "smp%s3", &pmic5_ftsmps525_lv, "vdd-s3"),
+	RPMH_VREG("smps4", "smp%s4", &pmic5_ftsmps525_lv, "vdd-s4"),
+	RPMH_VREG("smps5", "smp%s5", &pmic5_ftsmps525_lv, "vdd-s5"),
+	RPMH_VREG("smps6", "smp%s6", &pmic5_ftsmps525_lv, "vdd-s6"),
+	RPMH_VREG("smps7", "smp%s7", &pmic5_ftsmps525_lv, "vdd-s7"),
+	RPMH_VREG("smps8", "smp%s8", &pmic5_ftsmps525_lv, "vdd-s8"),
+	RPMH_VREG("ldo1",  "ldo%s1", &pmic5_nldo,   "vdd-l1"),
+	RPMH_VREG("ldo2",  "ldo%s2", &pmic5_nldo,   "vdd-l2"),
+	RPMH_VREG("ldo3",  "ldo%s3", &pmic5_nldo,   "vdd-l3"),
+	{}
+};
+
  static const struct rpmh_vreg_init_data pm8009_vreg_data[] = {
  	RPMH_VREG("smps1",  "smp%s1",  &pmic5_hfsmps510, "vdd-s1"),
  	RPMH_VREG("smps2",  "smp%s2",  &pmic5_hfsmps515, "vdd-s2"),
@@ -1314,6 +1383,18 @@ static const struct of_device_id __maybe_unused rpmh_regulator_match_table[] = {
  		.compatible = "qcom,pm8450-rpmh-regulators",
  		.data = pm8450_vreg_data,
  	},
+	{
+		.compatible = "qcom,pm8550-rpmh-regulators",
+		.data = pm8550_vreg_data,
+	},
+	{
+		.compatible = "qcom,pm8550ve-rpmh-regulators",
+		.data = pm8550ve_vreg_data,
+	},
+	{
+		.compatible = "qcom,pm8550vs-rpmh-regulators",
+		.data = pm8550vs_vreg_data,
+	},
  	{
  		.compatible = "qcom,pm8998-rpmh-regulators",
  		.data = pm8998_vreg_data,



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux