This series introduces the Qualcomm sa8540p-ride automotive development board, also called as Qdrive-3 board. Changes in v8: - Changed the schema of the regulators(Krzysztof) - Removed node remoteproc_adsp(Andrew) - Removed TODO comment for node usb_0_dwc3(Andrew) - Added Reviewed-by/Tested-by(Eric) Changes in v7: - Put the smpi bus related pmic changes in sseparate dtsi files(Konrad) - Mention allowed regulator modes via DT property regulator-allowed-modes (Konrad and Brian) - Remove unused ldo nodes vreg_l3c and vreg_l10c(Shazad) Changes in v6: - Introduced the new dts for the board, rather than moving common nodes between this one and SA8295 ADP board into dtsi file(Bjorn) - Drop 'adp' term to imply it being unrelated with ADP board(Internal discussion with Bjorn) - Removed Acked-by(Krzysztof) tag in dt-binding document, due to content change. - Not including Reviewed-by(Krzysztof), because of the content change. Changes in v5: - Moved the usb and ufs nodes from sa8540p-adp.dtsi file to respective board specific dts files: sa8295p-adp.dts and sa8540p-adp-ride.dts. Took inputs from Shazad Hussain in this regard(John) - Added more description of the board differences(John) - Not including Reviewed-by for Krzysztof, because of the new changes to be reviewed. - Removed Reported-by tag(John). Changes in v4: - Removed the ufs_card_hc node, as it is not mounted on Qdrive-3 board. - Removed usb_1 relared nodes, as usb1 doesn't have any port connected on Qdrive3 board. - Added Reported-by tag for Shazad(for ufs and usb_1 node removals) Changes in v3: - Added Acked-by tag (Krzysztof) - Renamed dtsi to sa8540p-adp.dtsi (John) - Removed copyright from sa8295-adp.dts and sa8295-adp.dtsi(John) - Added cover letter Changes in v2: - Make dt-binding patch as the first one in the patch set - Add , after year 2022, in the license header Initial version: - Move the common nodes to sa8540p-adp.dtsi, and create qrive-3 board specific file sa8540p-adp-ride.dts. Parikshit Pareek (2): dt-bindings: arm: qcom: Document additional sa8540p device arm64: dts: qcom: add SA8540P ride(Qdrive-3) .../devicetree/bindings/arm/qcom.yaml | 1 + arch/arm64/boot/dts/qcom/Makefile | 1 + arch/arm64/boot/dts/qcom/pm8450a.dtsi | 77 ++++++ arch/arm64/boot/dts/qcom/sa8540p-ride.dts | 221 ++++++++++++++++++ 4 files changed, 300 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/pm8450a.dtsi create mode 100644 arch/arm64/boot/dts/qcom/sa8540p-ride.dts -- 2.17.1
