Re: [PATCH v4 2/4] arm64: dts: mt8195: Add edptx and dptx nodes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Il 15/11/22 08:58, Rex-BC Chen (陳柏辰) ha scritto:
On Fri, 2022-11-11 at 13:22 +0100, Matthias Brugger wrote:

On 10/11/2022 07:37, Bo-Chen Chen wrote:
In MT8195, we use edptx as the internal display interface and use
dptx as the external display interface. Therefore, we need to add
these nodes to support the internal display and the external
display.

- Add dp calibration data in the efuse node.
- Add edptx and dptx nodes for MT8195.

Signed-off-by: Bo-Chen Chen <rex-bc.chen@xxxxxxxxxxxx>
Reviewed-by: AngeloGioacchino Del Regno <
angelogioacchino.delregno@xxxxxxxxxxxxx>
---
   arch/arm64/boot/dts/mediatek/mt8195.dtsi | 25
++++++++++++++++++++++++
   1 file changed, 25 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi
b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
index c380738d10cb..7acbef5a4517 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
@@ -1244,6 +1244,9 @@
   				reg = <0x189 0x2>;
   				bits = <7 5>;
   			};
+			dp_calibration: dp-data@1ac {
+				reg = <0x1ac 0x10>;
+			};
   		};
u3phy2: t-phy@11c40000 {
@@ -2205,5 +2208,27 @@
   			clock-names = "engine", "pixel", "pll";
   			status = "disabled";
   		};
+
+		edp_tx: edp-tx@1c500000 {
+			compatible = "mediatek,mt8195-edp-tx";
+			reg = <0 0x1c500000 0 0x8000>;
+			nvmem-cells = <&dp_calibration>;
+			nvmem-cell-names = "dp_calibration_data";
+			power-domains = <&spm
MT8195_POWER_DOMAIN_EPD_TX>;
+			interrupts = <GIC_SPI 676 IRQ_TYPE_LEVEL_HIGH
0>;
+			max-linkrate-mhz = <8100>;
+			status = "disabled";
+		};
+
+		dp_tx: dp-tx@1c600000 {
+			compatible = "mediatek,mt8195-dp-tx";
+			reg = <0 0x1c600000 0 0x8000>;
+			nvmem-cells = <&dp_calibration>;
+			nvmem-cell-names = "dp_calibration_data";
+			power-domains = <&spm
MT8195_POWER_DOMAIN_DP_TX>;
+			interrupts = <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH
0>;
+			max-linkrate-mhz = <8100>;
+			status = "disabled";
+		};

For some not really obvious reasons we get the following errors with
make CHECK_DTBS=1 mediatek/mt8195-cherry-tomato-r2.dtb

arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r2.dtb:0:0:
/soc/edp-tx@1c500000: failed to match any schema with compatible:
['mediatek,mt8195-edp-tx']
arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r2.dtb:0:0:
/soc/dp-tx@1c600000: failed to match any schema with compatible:
['mediatek,mt8195-dp-tx']

Can you please see how to fix this. Tested with next-20221111.

Regards,
Matthias


Hello Matthias,

I can not reproduce this issue in my local environment, but I am sure
the binding is in kernel master branch (v6.1-rc5):

https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/devicetree/bindings/display/mediatek/mediatek,dp.yaml?h=v6.1-rc5

It's strange that the message you provided said it can not find any
schema with ['mediatek,mt8195-edp-tx'] and ['mediatek,mt8195-dp-tx'].


Matthias, I can't reproduce that either... perhaps there's something odd that's
going on with your environment?

Cheers



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux