Add ADSP & CDSP remote processors.
Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sm6375.dtsi | 73 ++++++++++++++++++++++++++++
1 file changed, 73 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm6375.dtsi b/arch/arm64/boot/dts/qcom/sm6375.dtsi
index a904fe5dd9dc..ca2f99333abd 100644
--- a/arch/arm64/boot/dts/qcom/sm6375.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6375.dtsi
@@ -1358,6 +1358,79 @@ dispcc: clock-controller@5f00000 {
#reset-cells = <1>;
};
+ remoteproc_adsp: remoteproc@a400000 {
+ compatible = "qcom,sm6375-adsp-pas";
+ reg = <0 0x0a400000 0 0x100>;
+
+ interrupts-extended = <&intc GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+ <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready",
+ "handover", "stop-ack";
+
+ clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
+ clock-names = "xo";
+
+ power-domains = <&rpmpd SM6375_VDD_LPI_CX>,
+ <&rpmpd SM6375_VDD_LPI_MX>;
+ power-domain-names = "lcx", "lmx";
+
+ memory-region = <&pil_adsp_mem>;
+
+ qcom,smem-states = <&smp2p_adsp_out 0>;
+ qcom,smem-state-names = "stop";
+
+ status = "disabled";
+
+ glink-edge {
+ interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+ IPCC_MPROC_SIGNAL_GLINK_QMP
+ IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&ipcc IPCC_CLIENT_LPASS
+ IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+ label = "lpass";
+ qcom,remote-pid = <2>;
+ };
+ };
+
+ remoteproc_cdsp: remoteproc@b000000 {
+ compatible = "qcom,sm6375-cdsp-pas";
+ reg = <0x0 0x0b000000 0x0 0x100000>;
+
+ interrupts-extended = <&intc GIC_SPI 265 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready",
+ "handover", "stop-ack";
+
+ clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
+ clock-names = "xo";
+
+ power-domains = <&rpmpd SM6375_VDDCX>;
+
+ memory-region = <&pil_cdsp_mem>;
+
+ qcom,smem-states = <&smp2p_cdsp_out 0>;
+ qcom,smem-state-names = "stop";
+
+ status = "disabled";
+
+ glink-edge {
+ interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+ IPCC_MPROC_SIGNAL_GLINK_QMP
+ IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&ipcc IPCC_CLIENT_CDSP
+ IPCC_MPROC_SIGNAL_GLINK_QMP>;
+ label = "cdsp";
+ qcom,remote-pid = <5>;
+ };
+ };
+
apps_smmu: iommu@c600000 {
compatible = "qcom,sm6375-smmu-500", "arm,mmu-500";
reg = <0 0x0c600000 0 0x100000>;
--
2.38.1
