The A100 variant uses the same values for the timing registers, and it uses the same final power-on sequence, but it needs a different analog register configuration in the middle. Support this by moving the variant-specific parts to a hook provided by the variant. Signed-off-by: Samuel Holland <samuel@xxxxxxxxxxxx> --- (no changes since v1) drivers/phy/allwinner/phy-sun6i-mipi-dphy.c | 59 ++++++++++++--------- 1 file changed, 35 insertions(+), 24 deletions(-) diff --git a/drivers/phy/allwinner/phy-sun6i-mipi-dphy.c b/drivers/phy/allwinner/phy-sun6i-mipi-dphy.c index a2afedc399fd..ac144ee0f0a6 100644 --- a/drivers/phy/allwinner/phy-sun6i-mipi-dphy.c +++ b/drivers/phy/allwinner/phy-sun6i-mipi-dphy.c @@ -114,7 +114,10 @@ enum sun6i_dphy_direction { SUN6I_DPHY_DIRECTION_RX, }; +struct sun6i_dphy; + struct sun6i_dphy_variant { + void (*tx_power_on)(struct sun6i_dphy *dphy); bool rx_supported; }; @@ -156,33 +159,10 @@ static int sun6i_dphy_configure(struct phy *phy, union phy_configure_opts *opts) return 0; } -static int sun6i_dphy_tx_power_on(struct sun6i_dphy *dphy) +static void sun6i_a31_mipi_dphy_tx_power_on(struct sun6i_dphy *dphy) { u8 lanes_mask = GENMASK(dphy->config.lanes - 1, 0); - regmap_write(dphy->regs, SUN6I_DPHY_TX_CTL_REG, - SUN6I_DPHY_TX_CTL_HS_TX_CLK_CONT); - - regmap_write(dphy->regs, SUN6I_DPHY_TX_TIME0_REG, - SUN6I_DPHY_TX_TIME0_LP_CLK_DIV(14) | - SUN6I_DPHY_TX_TIME0_HS_PREPARE(6) | - SUN6I_DPHY_TX_TIME0_HS_TRAIL(10)); - - regmap_write(dphy->regs, SUN6I_DPHY_TX_TIME1_REG, - SUN6I_DPHY_TX_TIME1_CLK_PREPARE(7) | - SUN6I_DPHY_TX_TIME1_CLK_ZERO(50) | - SUN6I_DPHY_TX_TIME1_CLK_PRE(3) | - SUN6I_DPHY_TX_TIME1_CLK_POST(10)); - - regmap_write(dphy->regs, SUN6I_DPHY_TX_TIME2_REG, - SUN6I_DPHY_TX_TIME2_CLK_TRAIL(30)); - - regmap_write(dphy->regs, SUN6I_DPHY_TX_TIME3_REG, 0); - - regmap_write(dphy->regs, SUN6I_DPHY_TX_TIME4_REG, - SUN6I_DPHY_TX_TIME4_HS_TX_ANA0(3) | - SUN6I_DPHY_TX_TIME4_HS_TX_ANA1(3)); - regmap_write(dphy->regs, SUN6I_DPHY_ANA0_REG, SUN6I_DPHY_ANA0_REG_PWS | SUN6I_DPHY_ANA0_REG_DMPC | @@ -214,6 +194,36 @@ static int sun6i_dphy_tx_power_on(struct sun6i_dphy *dphy) SUN6I_DPHY_ANA3_EN_LDOC | SUN6I_DPHY_ANA3_EN_LDOD); udelay(1); +} + +static int sun6i_dphy_tx_power_on(struct sun6i_dphy *dphy) +{ + u8 lanes_mask = GENMASK(dphy->config.lanes - 1, 0); + + regmap_write(dphy->regs, SUN6I_DPHY_TX_CTL_REG, + SUN6I_DPHY_TX_CTL_HS_TX_CLK_CONT); + + regmap_write(dphy->regs, SUN6I_DPHY_TX_TIME0_REG, + SUN6I_DPHY_TX_TIME0_LP_CLK_DIV(14) | + SUN6I_DPHY_TX_TIME0_HS_PREPARE(6) | + SUN6I_DPHY_TX_TIME0_HS_TRAIL(10)); + + regmap_write(dphy->regs, SUN6I_DPHY_TX_TIME1_REG, + SUN6I_DPHY_TX_TIME1_CLK_PREPARE(7) | + SUN6I_DPHY_TX_TIME1_CLK_ZERO(50) | + SUN6I_DPHY_TX_TIME1_CLK_PRE(3) | + SUN6I_DPHY_TX_TIME1_CLK_POST(10)); + + regmap_write(dphy->regs, SUN6I_DPHY_TX_TIME2_REG, + SUN6I_DPHY_TX_TIME2_CLK_TRAIL(30)); + + regmap_write(dphy->regs, SUN6I_DPHY_TX_TIME3_REG, 0); + + regmap_write(dphy->regs, SUN6I_DPHY_TX_TIME4_REG, + SUN6I_DPHY_TX_TIME4_HS_TX_ANA0(3) | + SUN6I_DPHY_TX_TIME4_HS_TX_ANA1(3)); + + dphy->variant->tx_power_on(dphy); regmap_update_bits(dphy->regs, SUN6I_DPHY_ANA3_REG, SUN6I_DPHY_ANA3_EN_VTTC | @@ -470,6 +480,7 @@ static int sun6i_dphy_probe(struct platform_device *pdev) } static const struct sun6i_dphy_variant sun6i_a31_mipi_dphy_variant = { + .tx_power_on = sun6i_a31_mipi_dphy_tx_power_on, .rx_supported = true, }; -- 2.37.3