DW PCIe RP/EP reference manuals explicit define all the clocks and reset requirements in [1] and [2]. Seeing the DW PCIe vendor-specific DT-bindings have already started assigning random names to the same set of the clocks and resets lines, let's define a generic names sets and add them to the DW PCIe common DT-schema. Note since there are DW PCI-based vendor-specific DT-bindings with the custom names assigned to the same clocks and resets resources we have no much choice but to add them to the generic DT-schemas in order to have the schemas being applicable for such devices. These names are marked as vendor-specific and should be avoided being used in new bindings in favor of the generic names. [1] Synopsys DesignWare Cores PCI Express Controller Databook - DWC PCIe Root Port, Version 5.40a, March 2019, p.55 - 78. [2] Synopsys DesignWare Cores PCI Express Controller Databook - DWC PCIe Endpoint, Version 5.40a, March 2019, p.58 - 81. Signed-off-by: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx> Reviewed-by: Rob Herring <robh@xxxxxxxxxx> --- Changelog v3: - This is a new patch unpinned from the next one: https://lore.kernel.org/linux-pci/20220503214638.1895-2-Sergey.Semin@xxxxxxxxxxxxxxxxxxxx/ by the Rob' request. (@Rob) - Drop synonymous from the names list since the device schemas create their own enumerations anyway. Changelog v5: - Add platform-specific clock/reset names, but mark them as deprecated. Changelog v6: - Move the common *-names definitions to the RP/EP schemas. Thus drop the 'definitions' property. (@Rob) - Drop the 'deprecated' keywords from the vendor-specific names. (@Rob) --- .../bindings/pci/snps,dw-pcie-common.yaml | 120 ++++++++++++++++++ .../bindings/pci/snps,dw-pcie-ep.yaml | 6 + .../devicetree/bindings/pci/snps,dw-pcie.yaml | 2 - 3 files changed, 126 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/pci/snps,dw-pcie-common.yaml b/Documentation/devicetree/bindings/pci/snps,dw-pcie-common.yaml index 13c41cd50e54..4d9efcea3859 100644 --- a/Documentation/devicetree/bindings/pci/snps,dw-pcie-common.yaml +++ b/Documentation/devicetree/bindings/pci/snps,dw-pcie-common.yaml @@ -58,6 +58,126 @@ properties: minItems: 1 maxItems: 26 + clocks: + description: + DWC PCIe reference manual explicitly defines a set of the clocks required + to get the controller working correctly. In general all of them can + be divided into two groups':' application and core clocks. Note the + platforms may have some of the clock sources unspecified in case if the + corresponding domains are fed up from a common clock source. + minItems: 1 + maxItems: 7 + + clock-names: + minItems: 1 + maxItems: 7 + items: + oneOf: + - description: + Data Bus Interface (DBI) clock. Clock signal for the AXI-bus + interface of the Configuration-Dependent Module, which is + basically the set of the controller CSRs. + const: dbi + - description: + Application AXI-bus Master interface clock. Basically this is + a clock for the controller DMA interface (PCI-to-CPU). + const: mstr + - description: + Application AXI-bus Slave interface clock. This is a clock for + the CPU-to-PCI memory IO interface. + const: slv + - description: + Controller Core-PCS PIPE interface clock. It's normally + supplied by an external PCS-PHY. + const: pipe + - description: + Controller Primary clock. It's assumed that all controller input + signals (except resets) are synchronous to this clock. + const: core + - description: + Auxiliary clock for the controller PMC domain. The controller + partitioning implies having some parts to operate with this + clock in some power management states. + const: aux + - description: + Generic reference clock. In case if there are several + interfaces fed up with a common clock source it's advisable to + define it with this name (for instance pipe, core and aux can + be connected to a single source of the periodic signal). + const: ref + - description: + Clock for the PHY registers interface. Originally this is + a PHY-viewport-based interface, but some platform may have + specifically designed one. + const: phy_reg + - description: + Vendor-specific clock names. Consider using the generic names + above for new bindings. + oneOf: + - description: See native 'dbi' clock for details + enum: [ pcie, pcie_apb_sys, aclk_dbi ] + - description: See native 'mstr/slv' clock for details + enum: [ pcie_bus, pcie_inbound_axi, pcie_aclk, aclk_mst, aclk_slv ] + - description: See native 'pipe' clock for details + enum: [ pcie_phy, pcie_phy_ref, link ] + - description: See native 'aux' clock for details + enum: [ pcie_aux ] + - description: See native 'ref' clock for details. + enum: [ gio ] + - description: See nativs 'phy_reg' clock for details + enum: [ pcie_apb_phy, pclk ] + + resets: + description: + DWC PCIe reference manual explicitly defines a set of the reset + signals required to be de-asserted to properly activate the controller + sub-parts. All of these signals can be divided into two sub-groups':' + application and core resets with respect to the main sub-domains they + are supposed to reset. Note the platforms may have some of these signals + unspecified in case if they are automatically handled or aggregated into + a comprehensive control module. + minItems: 1 + maxItems: 10 + + reset-names: + minItems: 1 + maxItems: 10 + items: + oneOf: + - description: Data Bus Interface (DBI) domain reset + const: dbi + - description: AXI-bus Master interface reset + const: mstr + - description: AXI-bus Slave interface reset + const: slv + - description: Application-dependent interface reset + const: app + - description: Controller Non-sticky CSR flags reset + const: non-sticky + - description: Controller sticky CSR flags reset + const: sticky + - description: PIPE-interface (Core-PCS) logic reset + const: pipe + - description: + Controller primary reset (resets everything except PMC module) + const: core + - description: PCS/PHY block reset + const: phy + - description: PMC hot reset signal + const: hot + - description: Cold reset signal + const: pwr + - description: + Vendor-specific reset names. Consider using the generic names + above for new bindings. + oneOf: + - description: See native 'app' reset for details + enum: [ apps, gio, apb ] + - description: See native 'phy' reset for details + enum: [ pciephy, link ] + - description: See native 'pwr' reset for details + enum: [ turnoff ] + phys: description: There can be up to the number of possible lanes PHYs specified placed in diff --git a/Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml index f4d7eb2dec4d..8fc2151691a4 100644 --- a/Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml +++ b/Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml @@ -180,6 +180,12 @@ examples: interrupts = <23>, <24>; interrupt-names = "dma0", "dma1"; + clocks = <&sys_clk 12>, <&sys_clk 24>; + clock-names = "dbi", "ref"; + + resets = <&sys_rst 12>, <&sys_rst 24>; + reset-names = "dbi", "phy"; + phys = <&pcie_phy0>, <&pcie_phy1>, <&pcie_phy2>, <&pcie_phy3>; phy-names = "pcie0", "pcie1", "pcie2", "pcie3"; diff --git a/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml b/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml index 59d3bbb5883a..c62c8fe517ae 100644 --- a/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml +++ b/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml @@ -195,8 +195,6 @@ properties: - contains: const: msi - clocks: true - additionalProperties: true required: -- 2.38.1
