On 31-10-22, 23:32, Manivannan Sadhasivam wrote:
> Add separate tables_hs_b instance to allow the PHY driver to configure the
> PHY in HS Series B mode. The individual SoC configs need to supply the
> serdes register setting in tables_hs_b and the UFS driver can request the
> Series B mode by calling phy_set_mode() with mode set to PHY_MODE_UFS_HS_B.
>
> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
> ---
> drivers/phy/qualcomm/phy-qcom-qmp-ufs.c | 18 ++++++++++++++++++
> 1 file changed, 18 insertions(+)
>
> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
> index cdfda4e6d575..4c6a2b5afc9a 100644
> --- a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
> +++ b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
> @@ -20,6 +20,8 @@
> #include <linux/reset.h>
> #include <linux/slab.h>
>
> +#include <ufs/unipro.h>
> +
> #include <dt-bindings/phy/phy.h>
>
> #include "phy-qcom-qmp.h"
> @@ -549,6 +551,8 @@ struct qmp_phy_cfg {
>
> /* Main init sequence for PHY blocks - serdes, tx, rx, pcs */
> const struct qmp_phy_cfg_tables tables;
> + /* Additional sequence for HS Series B */
> + const struct qmp_phy_cfg_tables tables_hs_b;
what am i missing, where was tables_hs_b added?
>
> /* clock ids to be requested */
> const char * const *clk_list;
> @@ -582,6 +586,7 @@ struct qmp_phy_cfg {
> * @rx2: iomapped memory space for second lane's rx (in dual lane PHYs)
> * @pcs_misc: iomapped memory space for lane's pcs_misc
> * @qmp: QMP phy to which this lane belongs
> + * @mode: PHY mode configured by the UFS driver
> */
> struct qmp_phy {
> struct phy *phy;
> @@ -594,6 +599,7 @@ struct qmp_phy {
> void __iomem *rx2;
> void __iomem *pcs_misc;
> struct qcom_qmp *qmp;
> + u32 mode;
> };
>
> /**
> @@ -983,6 +989,8 @@ static int qmp_ufs_power_on(struct phy *phy)
> int ret;
>
> qmp_ufs_serdes_init(qphy, &cfg->tables);
> + if (qphy->mode == PHY_MODE_UFS_HS_B)
> + qmp_ufs_serdes_init(qphy, &cfg->tables_hs_b);
>
> qmp_ufs_lanes_init(qphy, &cfg->tables);
>
> @@ -1070,6 +1078,15 @@ static int qmp_ufs_disable(struct phy *phy)
> return qmp_ufs_exit(phy);
> }
>
> +static int qmp_ufs_set_mode(struct phy *phy, enum phy_mode mode, int submode)
> +{
> + struct qmp_phy *qphy = phy_get_drvdata(phy);
> +
> + qphy->mode = mode;
> +
> + return 0;
> +}
> +
> static int qmp_ufs_vreg_init(struct device *dev, const struct qmp_phy_cfg *cfg)
> {
> struct qcom_qmp *qmp = dev_get_drvdata(dev);
> @@ -1105,6 +1122,7 @@ static int qmp_ufs_clk_init(struct device *dev, const struct qmp_phy_cfg *cfg)
> static const struct phy_ops qcom_qmp_ufs_ops = {
> .power_on = qmp_ufs_enable,
> .power_off = qmp_ufs_disable,
> + .set_mode = qmp_ufs_set_mode,
> .owner = THIS_MODULE,
> };
>
> --
> 2.25.1
--
~Vinod
