[PATCH 4/4] arm64: dts: rockchip: Enable PCIe 2 on SOQuartz CM4IO

[Nicolas Frattaroli <frattaroli.nicolas@xxxxxxxxx>]

This patch enables the PCIe2 on the CM4IO board when paired with
a SOQuartz CM4 System-on-Module board. combphy2 also needs to be
enabled in this case to make the PHY work for this.

Signed-off-by: Nicolas Frattaroli <frattaroli.nicolas@xxxxxxxxx>
---
 arch/arm64/boot/dts/rockchip/rk3566-soquartz-cm4.dts | 10 ++++++++++
 arch/arm64/boot/dts/rockchip/rk3566-soquartz.dtsi    | 12 ++++++++++++
 2 files changed, 22 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3566-soquartz-cm4.dts b/arch/arm64/boot/dts/rockchip/rk3566-soquartz-cm4.dts
index e00568a6be5c..4cf60be267ed 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-soquartz-cm4.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3566-soquartz-cm4.dts
@@ -30,6 +30,11 @@ vcc_5v: vcc-5v-regulator {
 	};
 };
 
+/* phy for pcie */
+&combphy2 {
+	status = "okay";
+};
+
 &gmac1 {
 	status = "okay";
 };
@@ -105,6 +110,11 @@ &led_work {
 	status = "okay";
 };
 
+&pcie2x1 {
+	vpcie3v3-supply = <&vcc_3v3>;
+	status = "okay";
+};
+
 &rgmii_phy1 {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-soquartz.dtsi b/arch/arm64/boot/dts/rockchip/rk3566-soquartz.dtsi
index 1b975822effa..294354e95336 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-soquartz.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3566-soquartz.dtsi
@@ -487,6 +487,12 @@ rgmii_phy1: ethernet-phy@0 {
 	};
 };
 
+&pcie2x1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_reset_h>;
+	reset-gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>;
+};
+
 &pinctrl {
 	bt {
 		bt_enable_h: bt-enable-h {
@@ -512,6 +518,12 @@ diy_led_enable_h: diy-led-enable-h {
 		};
 	};
 
+	pcie {
+		pcie_reset_h: pcie-reset-h {
+			rockchip,pins = <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
 	pmic {
 		pmic_int_l: pmic-int-l {
 			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
-- 
2.38.1