Use correct polarity in example and powerdown-gpios description.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
Changes since v1:
1. New patch.
---
Documentation/devicetree/bindings/sound/qcom,wsa883x.yaml | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/sound/qcom,wsa883x.yaml b/Documentation/devicetree/bindings/sound/qcom,wsa883x.yaml
index 6113f65f2990..99f9c10bbc83 100644
--- a/Documentation/devicetree/bindings/sound/qcom,wsa883x.yaml
+++ b/Documentation/devicetree/bindings/sound/qcom,wsa883x.yaml
@@ -23,7 +23,7 @@ properties:
maxItems: 1
powerdown-gpios:
- description: GPIO spec for Powerdown/Shutdown line to use
+ description: GPIO spec for Powerdown/Shutdown line to use (pin SD_N)
maxItems: 1
vdd-supply:
@@ -47,6 +47,8 @@ additionalProperties: false
examples:
- |
+ #include <dt-bindings/gpio/gpio.h>
+
soundwire-controller@3250000 {
#address-cells = <2>;
#size-cells = <0>;
@@ -55,7 +57,7 @@ examples:
speaker@0,1 {
compatible = "sdw10217020200";
reg = <0 1>;
- powerdown-gpios = <&tlmm 1 0>;
+ powerdown-gpios = <&tlmm 1 GPIO_ACTIVE_LOW>;
vdd-supply = <&vreg_s10b_1p8>;
#thermal-sensor-cells = <0>;
#sound-dai-cells = <0>;
@@ -64,7 +66,7 @@ examples:
speaker@0,2 {
compatible = "sdw10217020200";
reg = <0 2>;
- powerdown-gpios = <&tlmm 89 0>;
+ powerdown-gpios = <&tlmm 89 GPIO_ACTIVE_LOW>;
vdd-supply = <&vreg_s10b_1p8>;
#thermal-sensor-cells = <0>;
#sound-dai-cells = <0>;
--
2.34.1
