[PATCH v2 2/6] dt-bindings: can: mcan: Add ECC functionality to message ram

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Whenever the data is transferred or stored on message ram, there are
inherent risks of it being lost or corruption known as single-bit errors.

ECC constantly scans data as it is processed to the message ram, using a
method known as parity checking and raise the error signals for corruption.

Add error correction code config property to enable/disable the
error correction code (ECC) functionality for Message RAM used to create
valid ECC checksums.

Signed-off-by: Chandrasekar R <rcsekar@xxxxxxxxxxx>
Cc: devicetree@xxxxxxxxxxxxxxx
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@xxxxxxxxxx>
Cc: Rob Herring <robh+dt@xxxxxxxxxx>
Signed-off-by: Vivek Yadav <vivek.2311@xxxxxxxxxxx>
---
 .../bindings/net/can/bosch,m_can.yaml         | 31 +++++++++++++++++++
 1 file changed, 31 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml b/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml
index 26aa0830eea1..91dc458ec33f 100644
--- a/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml
+++ b/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml
@@ -50,6 +50,12 @@ properties:
       - const: hclk
       - const: cclk
 
+  tesla,mram-ecc-cfg:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description:
+      Handle to system control region that contains the ECC INIT register
+      and register offset to the ECC INIT register.
+
   bosch,mram-cfg:
     description: |
       Message RAM configuration data.
@@ -149,4 +155,29 @@ examples:
       };
     };
 
+  # Example 2: m_can on the FSD SoC
+  - |
+    #include <dt-bindings/clock/fsd-clk.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+      can@14088000 {
+        compatible = "bosch,m_can";
+        reg = <0x0 0x14088000 0x0 0x0200>,
+              <0x0 0x14080000 0x0 0x8000>;
+        reg-names = "m_can", "message_ram";
+        interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "int0", "int1";
+        pinctrl-names = "default";
+        pinctrl-0 = <&m_can0_bus>;
+        clocks = <&clock_peric PERIC_MCAN0_IPCLKPORT_PCLK>,
+                 <&clock_peric PERIC_MCAN0_IPCLKPORT_CCLK>;
+        clock-names = "hclk", "cclk";
+        tesla,mram-ecc-cfg = <&sysreg_peric 0x708>;
+        bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+      };
+    };
 ...
-- 
2.17.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux