From: Dave Gerlach <d-gerlach@xxxxxx>
Add documentation for the lpm region which tells the ti-sci driver where
to load the FS Stub low power mode firmware and also the firmware-name
which tells the driver which binary to load. Both of these are optional
for normal system operation but required to enabled suspend-to-mem usage
of Deep Sleep state.
Signed-off-by: Dave Gerlach <d-gerlach@xxxxxx>
Signed-off-by: Vibhore Vardhan <vibhore@xxxxxx>
Signed-off-by: Georgi Vlaev <g-vlaev@xxxxxx>
---
.../bindings/arm/keystone/ti,sci.yaml | 21 +++++++++++++++----
1 file changed, 17 insertions(+), 4 deletions(-)
diff --git a/Documentation/devicetree/bindings/arm/keystone/ti,sci.yaml b/Documentation/devicetree/bindings/arm/keystone/ti,sci.yaml
index 34f5f877d444..4c5213de24bc 100644
--- a/Documentation/devicetree/bindings/arm/keystone/ti,sci.yaml
+++ b/Documentation/devicetree/bindings/arm/keystone/ti,sci.yaml
@@ -42,12 +42,19 @@ properties:
- const: ti,am654-sci
reg-names:
- description: |
- Specifies the debug messages memory mapped region that is optionally
- made available from TI-SCI controller.
- const: debug_messages
+ items:
+ - const: debug_messages
+ - const: lpm
+ minItems: 1
reg:
+ items:
+ - description: |
+ Specifies the debug messages memory mapped region that is optionally
+ made available from TI-SCI controller.
+ - description: |
+ Specifies the lpm memory mapped region where the FS Stub low power
+ firmware is to be loaded.
minItems: 1
mbox-names:
@@ -83,6 +90,12 @@ properties:
type: object
$ref: /schemas/reset/ti,sci-reset.yaml#
+ firmware-name:
+ description: |
+ Name of binary of FS Stub low power firmware located on the
+ firmware search path.
+ $ref: /schemas/types.yaml#/definitions/string
+
required:
- compatible
- mbox-names
--
2.30.2
