On 08/11/2022 10:28, Jim Liu wrote:
> Add the SGPIO controller to the NPCM750 devicetree
>
> Signed-off-by: Jim Liu <JJLIU0@xxxxxxxxxxx>
> ---
> Changes for v2:
> - modify dts node
> ---
> arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi | 30 +++++++++++++++++++
> 1 file changed, 30 insertions(+)
>
> diff --git a/arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi b/arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi
> index c7b5ef15b716..9cac60734b57 100644
> --- a/arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi
> +++ b/arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi
> @@ -330,6 +330,36 @@
> status = "disabled";
> };
>
> + sgpio1: sgpio@101000 {
Node names should be generic.
https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation
> + compatible = "nuvoton,npcm750-sgpio";
> + reg = <0x101000 0x200>;
> + clocks = <&clk NPCM7XX_CLK_APB3>;
> + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
> + bus-frequency = <16000000>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&iox1_pins>;
> + nin_gpios = <64>;
> + nout_gpios = <64>;
> + status = "disabled";
Why? What is missing from external resources?
> + };
> +
> + sgpio2: sgpio@102000 {
Node names should be generic.
https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation
> + compatible = "nuvoton,npcm750-sgpio";
> + reg = <0x102000 0x200>;
> + clocks = <&clk NPCM7XX_CLK_APB3>;
> + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
> + bus-frequency = <16000000>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&iox2_pins>;
> + nin_gpios = <64>;
> + nout_gpios = <64>;
> + status = "disabled";
Why? What is missing from external resources?
Best regards,
Krzysztof
