From: Cristian Marussi <cristian.marussi@xxxxxxx>
[ Upstream commit c4a7b9b587ca1bb4678d48d8be7132492b23a81c ]
When thermnal zones are defined, trip points definitions are mandatory.
Define a couple of critical trip points for monitoring of existing
PMIC and SOC thermal zones.
This was lost between txt to yaml conversion and was re-enforced recently
via the commit 8c596324232d ("dt-bindings: thermal: Fix missing required property")
Cc: Rob Herring <robh+dt@xxxxxxxxxx>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@xxxxxxxxxx>
Cc: devicetree@xxxxxxxxxxxxxxx
Signed-off-by: Cristian Marussi <cristian.marussi@xxxxxxx>
Fixes: f7b636a8d83c ("arm64: dts: juno: add thermal zones for scpi sensors")
Link: https://lore.kernel.org/r/20221028140833.280091-8-cristian.marussi@xxxxxxx
Signed-off-by: Sudeep Holla <sudeep.holla@xxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
arch/arm64/boot/dts/arm/juno-base.dtsi | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi
index 2c0161125ece..cb45a2f0537a 100644
--- a/arch/arm64/boot/dts/arm/juno-base.dtsi
+++ b/arch/arm64/boot/dts/arm/juno-base.dtsi
@@ -595,12 +595,26 @@ pmic {
polling-delay = <1000>;
polling-delay-passive = <100>;
thermal-sensors = <&scpi_sensors0 0>;
+ trips {
+ pmic_crit0: trip0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
};
soc {
polling-delay = <1000>;
polling-delay-passive = <100>;
thermal-sensors = <&scpi_sensors0 3>;
+ trips {
+ soc_crit0: trip0 {
+ temperature = <80000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
};
big_cluster_thermal_zone: big-cluster {
--
2.35.1
