Re: [PATCH v4 3/3] dt-bindings: soundwire: Convert text bindings to DT Schema

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 08/11/2022 07:42, Srinivasa Rao Mandadapu wrote:
> 
> On 11/7/2022 8:41 PM, Krzysztof Kozlowski wrote:
> Thanks for Your time Krzysztof!!!
>> On 07/11/2022 15:20, Srinivasa Rao Mandadapu wrote:
>>> Convert soundwire text bindings to DT Schema format.
>>>
>>> Update interrupt property items as per device tree,
>>> as it is not appropriately described in text file.
>>>
>>> Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@xxxxxxxxxxx>
>>> Co-developed-by: Ratna Deepthi Kudaravalli <quic_rkudarav@xxxxxxxxxxx>
>>> Signed-off-by: Ratna Deepthi Kudaravalli <quic_rkudarav@xxxxxxxxxxx>
>>> ---
>>> This patch depends on:
>>>      https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=42801e6185290d63691bd39cf8a3bba6cd5fe520
>> Hi,
>>
>> This is a bit surprising. You pointed to Linus' repo, so what does this
>> dependency mean? The Linus' repo is the mainline, there is nothing else,
>> so all its commits are already in every tree... unless this is an RC
>> fix? If so, you should rather say which RC is needed.
> 
> Yeah. Will remove it. Actually in initial version, when used different 
> repo, got bot errors.
> 
> So to fix that, mentioned this dependency and continued the same in next 
> versions.
> 
>>
>>> Changes since V3:
>>>    -- Remove subnode description and add appropriate pattern properties.
>>>    -- Add interrput names in example.
>>>    -- update some properties description.
>>>    -- Revert minIteams change in previous version.
>>>    -- Rebase to latest code base.
>>> Changes since V2:
>>>    -- Update commit message.
>>>    -- Add child node property.
>>>    -- Change file name.
>>>    -- Remove minIteams for few properties.
>>>    -- Remove redundant required properties.
>>>    -- Remove redundant description for wakeup-source property.
>>>    -- Update interrupt property items.
>>> Changes since V1:
>>>    -- Remove the status field in example.
>>>    -- Remove interrupt-names property in the required list.
>>>    -- Add the wakeup-source property.	
>>>   
>>>   .../devicetree/bindings/soundwire/qcom,sdw.txt     | 215 ------------------
>>>   .../bindings/soundwire/qcom,soundwire.yaml         | 241 +++++++++++++++++++++
>>>   2 files changed, 241 insertions(+), 215 deletions(-)
>>>   delete mode 100644 Documentation/devicetree/bindings/soundwire/qcom,sdw.txt
>>>   create mode 100644 Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml
>>>
>>> diff --git a/Documentation/devicetree/bindings/soundwire/qcom,sdw.txt b/Documentation/devicetree/bindings/soundwire/qcom,sdw.txt
>>> deleted file mode 100644
>>> index e0faed8..0000000
>>> --- a/Documentation/devicetree/bindings/soundwire/qcom,sdw.txt
>>> +++ /dev/null
>>> @@ -1,215 +0,0 @@
>>> -Qualcomm SoundWire Controller Bindings
>>> -
>>> -
>>> -This binding describes the Qualcomm SoundWire Controller along with its
>>> -board specific bus parameters.
>>> -
>>> -- compatible:
>>> -	Usage: required
>>> -	Value type: <stringlist>
>>> -	Definition: must be "qcom,soundwire-v<MAJOR>.<MINOR>.<STEP>",
>>> -		    Example:
>>> -			"qcom,soundwire-v1.3.0"
>>> -			"qcom,soundwire-v1.5.0"
>>> -			"qcom,soundwire-v1.5.1"
>>> -			"qcom,soundwire-v1.6.0"
>>> -			"qcom,soundwire-v1.7.0"
>>> -- reg:
>>> -	Usage: required
>>> -	Value type: <prop-encoded-array>
>>> -	Definition: the base address and size of SoundWire controller
>>> -		    address space.
>>> -
>>> -- interrupts:
>>> -	Usage: required
>>> -	Value type: <prop-encoded-array>
>>> -	Definition: should specify the SoundWire Controller core and optional
>>> -		    wake IRQ
>>> -
>>> -- interrupt-names:
>>> -	Usage: Optional
>>> -	Value type: boolean
>>> -	Value type: <stringlist>
>>> -	Definition: should be "core" for core and "wakeup" for wake interrupt.
>>> -
>>> -- wakeup-source:
>>> -	Usage: Optional
>>> -	Value type: boolean
>>> -	Definition: should specify if SoundWire Controller is wake up capable.
>>> -
>>> -- clock-names:
>>> -	Usage: required
>>> -	Value type: <stringlist>
>>> -	Definition: should be "iface" for SoundWire Controller interface clock
>>> -
>>> -- clocks:
>>> -	Usage: required
>>> -	Value type: <prop-encoded-array>
>>> -	Definition: should specify the SoundWire Controller interface clock
>>> -
>>> -- #sound-dai-cells:
>>> -	Usage: required
>>> -	Value type: <u32>
>>> -	Definition: must be 1 for digital audio interfaces on the controller.
>>> -
>>> -- qcom,dout-ports:
>>> -	Usage: required
>>> -	Value type: <u32>
>>> -	Definition: must be count of data out ports
>>> -
>>> -- qcom,din-ports:
>>> -	Usage: required
>>> -	Value type: <u32>
>>> -	Definition: must be count of data in ports
>>> -
>>> -- qcom,ports-offset1:
>>> -	Usage: required
>>> -	Value type: <prop-encoded-array>
>>> -	Definition: should specify payload transport window offset1 of each
>>> -		    data port. Out ports followed by In ports.
>>> -		    Value of 0xFF indicates that this option is not implemented
>>> -		    or applicable for the respective data port.
>>> -		    More info in MIPI Alliance SoundWire 1.0 Specifications.
>>> -
>>> -- qcom,ports-offset2:
>>> -	Usage: required
>>> -	Value type: <prop-encoded-array>
>>> -	Definition: should specify payload transport window offset2 of each
>>> -		    data port. Out ports followed by In ports.
>>> -		    Value of 0xFF indicates that this option is not implemented
>>> -		    or applicable for the respective data port.
>>> -		    More info in MIPI Alliance SoundWire 1.0 Specifications.
>>> -
>>> -- qcom,ports-sinterval-low:
>>> -	Usage: required
>>> -	Value type: <prop-encoded-array>
>>> -	Definition: should be sample interval low of each data port.
>>> -		    Out ports followed by In ports. Used for Sample Interval
>>> -		    calculation.
>>> -		    Value of 0xFF indicates that this option is not implemented
>>> -		    or applicable for the respective data port.
>>> -		    More info in MIPI Alliance SoundWire 1.0 Specifications.
>>> -
>>> -- qcom,ports-word-length:
>>> -	Usage: optional
>>> -	Value type: <prop-encoded-array>
>>> -	Definition: should be size of payload channel sample.
>>> -		    Value of 0xFF indicates that this option is not implemented
>>> -		    or applicable for the respective data port.
>>> -		    More info in MIPI Alliance SoundWire 1.0 Specifications.
>>> -
>>> -- qcom,ports-block-pack-mode:
>>> -	Usage: optional
>>> -	Value type: <prop-encoded-array>
>>> -	Definition: should be 0 or 1 to indicate the block packing mode.
>>> -		    0 to indicate Blocks are per Channel
>>> -		    1 to indicate Blocks are per Port.
>>> -		    Out ports followed by In ports.
>>> -		    Value of 0xFF indicates that this option is not implemented
>>> -		    or applicable for the respective data port.
>>> -		    More info in MIPI Alliance SoundWire 1.0 Specifications.
>>> -
>>> -- qcom,ports-block-group-count:
>>> -	Usage: optional
>>> -	Value type: <prop-encoded-array>
>>> -	Definition: should be in range 1 to 4 to indicate how many sample
>>> -		    intervals are combined into a payload.
>>> -		    Out ports followed by In ports.
>>> -		    Value of 0xFF indicates that this option is not implemented
>>> -		    or applicable for the respective data port.
>>> -		    More info in MIPI Alliance SoundWire 1.0 Specifications.
>>> -
>>> -- qcom,ports-lane-control:
>>> -	Usage: optional
>>> -	Value type: <prop-encoded-array>
>>> -	Definition: should be in range 0 to 7 to identify which	data lane
>>> -		    the data port uses.
>>> -		    Out ports followed by In ports.
>>> -		    Value of 0xFF indicates that this option is not implemented
>>> -		    or applicable for the respective data port.
>>> -		    More info in MIPI Alliance SoundWire 1.0 Specifications.
>>> -
>>> -- qcom,ports-hstart:
>>> -	Usage: optional
>>> -	Value type: <prop-encoded-array>
>>> -	Definition: should be number identifying lowerst numbered coloum in
>>> -		    SoundWire Frame, i.e. left edge of the Transport sub-frame
>>> -		    for each port. Values between 0 and 15 are valid.
>>> -		    Out ports followed by In ports.
>>> -		    Value of 0xFF indicates that this option is not implemented
>>> -		    or applicable for the respective data port.
>>> -		    More info in MIPI Alliance SoundWire 1.0 Specifications.
>>> -
>>> -- qcom,ports-hstop:
>>> -	Usage: optional
>>> -	Value type: <prop-encoded-array>
>>> -	Definition: should be number identifying highest numbered coloum in
>>> -		    SoundWire Frame, i.e. the right edge of the Transport
>>> -		    sub-frame for each port. Values between 0 and 15 are valid.
>>> -		    Out ports followed by In ports.
>>> -		    Value of 0xFF indicates that this option is not implemented
>>> -		    or applicable for the respective data port.
>>> -		    More info in MIPI Alliance SoundWire 1.0 Specifications.
>>> -
>>> -- qcom,dports-type:
>>> -	Usage: optional
>>> -	Value type: <prop-encoded-array>
>>> -	Definition: should be one of the following types
>>> -		    0 for reduced port
>>> -		    1 for simple ports
>>> -		    2 for full port
>>> -		    Out ports followed by In ports.
>>> -		    Value of 0xFF indicates that this option is not implemented
>>> -		    or applicable for the respective data port.
>>> -		    More info in MIPI Alliance SoundWire 1.0 Specifications.
>>> -
>>> -- reset:
>>> -	Usage: optional
>>> -	Value type: <prop-encoded-array>
>>> -	Definition: Should specify the SoundWire audio CSR reset controller interface,
>>> -		    which is required for SoundWire version 1.6.0 and above.
>>> -
>>> -- reset-names:
>>> -	Usage: optional
>>> -	Value type: <stringlist>
>>> -	Definition: should be "swr_audio_cgcr" for SoundWire audio CSR reset
>>> -		    controller interface.
>>> -
>>> -Note:
>>> -	More Information on detail of encoding of these fields can be
>>> -found in MIPI Alliance SoundWire 1.0 Specifications.
>>> -
>>> -= SoundWire devices
>>> -Each subnode of the bus represents SoundWire device attached to it.
>>> -The properties of these nodes are defined by the individual bindings.
>>> -
>>> -= EXAMPLE
>>> -The following example represents a SoundWire controller on DB845c board
>>> -which has controller integrated inside WCD934x codec on SDM845 SoC.
>>> -
>>> -soundwire: soundwire@c85 {
>>> -	compatible = "qcom,soundwire-v1.3.0";
>>> -	reg = <0xc85 0x20>;
>>> -	interrupts = <20 IRQ_TYPE_EDGE_RISING>;
>>> -	clocks = <&wcc>;
>>> -	clock-names = "iface";
>>> -	resets = <&lpass_audiocc LPASS_AUDIO_SWR_TX_CGCR>;
>>> -	reset-names = "swr_audio_cgcr";
>>> -	#sound-dai-cells = <1>;
>>> -	qcom,dports-type = <0>;
>>> -	qcom,dout-ports	= <6>;
>>> -	qcom,din-ports	= <2>;
>>> -	qcom,ports-sinterval-low = /bits/ 8  <0x07 0x1F 0x3F 0x7 0x1F 0x3F 0x0F 0x0F>;
>>> -	qcom,ports-offset1 = /bits/ 8 <0x01 0x02 0x0C 0x6 0x12 0x0D 0x07 0x0A >;
>>> -	qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x1F 0x00 0x00 0x1F 0x00 0x00>;
>>> -
>>> -	/* Left Speaker */
>>> -	left{
>>> -		....
>>> -	};
>>> -
>>> -	/* Right Speaker */
>>> -	right{
>>> -		....
>>> -	};
>>> -};
>>> diff --git a/Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml b/Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml
>>> new file mode 100644
>>> index 0000000..b0590cb
>>> --- /dev/null
>>> +++ b/Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml
>>> @@ -0,0 +1,241 @@
>>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>>> +%YAML 1.2
>>> +---
>>> +$id: http://devicetree.org/schemas/soundwire/qcom,soundwire.yaml#
>>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>>> +
>>> +title: Qualcomm SoundWire Controller
>>> +
>>> +maintainers:
>>> +  - Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
>>> +  - Srinivasa Rao Mandadapu <quic_srivasam@xxxxxxxxxxx>
>>> +
>>> +description:
>>> +  The Qualcomm SoundWire controller along with its board specific bus parameters.
>>> +
>>> +properties:
>>> +  compatible:
>>> +    enum:
>>> +      - qcom,soundwire-v1.3.0
>>> +      - qcom,soundwire-v1.5.0
>>> +      - qcom,soundwire-v1.5.1
>>> +      - qcom,soundwire-v1.6.0
>>> +      - qcom,soundwire-v1.7.0
>> Missing blank line.
> Okay. will add it.
>>> +  reg:
>>> +    maxItems: 1
>>> +
>>> +  interrupts:
>>> +    minItems: 1
>>> +    items:
>>> +      - description: specify the SoundWire controller core.
>>> +      - description: specify the Soundwire controller wake IRQ.
>>> +
>>> +  interrupt-names:
>>> +    minItems: 1
>>> +    items:
>>> +      - const: core
>>> +      - const: wakeup
>>> +
>>> +  clocks:
>>> +    items:
>>> +      - description: iface clock
>>> +
>>> +  clock-names:
>>> +    items:
>>> +      - const: iface
>>> +
>>> +  resets:
>>> +    items:
>>> +      - description: SWR_AUDIO_CGCR RESET
>>> +
>>> +  reset-names:
>>> +    items:
>>> +      - const: swr_audio_cgcr
>>> +
>>> +  '#sound-dai-cells':
>>> +    const: 1
>>> +
>>> +  '#address-cells':
>>> +    const: 2
>>> +
>>> +  '#size-cells':
>>> +    const: 0
>>> +
>>> +  wakeup-source: true
>>> +
>>> +  qcom,din-ports:
>>> +    $ref: /schemas/types.yaml#/definitions/uint32
>>> +    description: count of data in ports
>>> +
>>> +  qcom,dout-ports:
>>> +    $ref: /schemas/types.yaml#/definitions/uint32
>>> +    description: count of data out ports
>>> +
>>> +  qcom,ports-word-length:
>>> +    $ref: /schemas/types.yaml#/definitions/uint8-array
>>> +    description: Size of payload channel sample.
>>> +                 Value of 0xFF indicates that this option is not implemented
>>> +                 or applicable for the respective data port.
>>> +                 More info in MIPI Alliance SoundWire 1.0 Specifications.
>>> +    minItems: 3
>>> +    maxItems: 5
>>> +
>>> +  qcom,ports-sinterval-low:
>>> +    $ref: /schemas/types.yaml#/definitions/uint8-array
>>> +    description: Sample interval low of each data port.
>>> +                 Out ports followed by In ports. Used for Sample Interval
>>> +                 calculation.
>>> +                 Value of 0xFF indicates that this option is not implemented
>>> +                 or applicable for the respective data port.
>>> +                 More info in MIPI Alliance SoundWire 1.0 Specifications.
>>> +    minItems: 3
>>> +    maxItems: 8
>>> +
>>> +  qcom,ports-offset1:
>>> +    $ref: /schemas/types.yaml#/definitions/uint8-array
>>> +    description: Payload transport window offset1 of each
>>> +                 data port. Out ports followed by In ports.
>>> +                 Value of 0xFF indicates that this option is not implemented
>>> +                 or applicable for the respective data port.
>>> +                 More info in MIPI Alliance SoundWire 1.0 Specifications.
>>> +    minItems: 3
>>> +    maxItems: 8
>>> +
>>> +  qcom,ports-offset2:
>>> +    $ref: /schemas/types.yaml#/definitions/uint8-array
>>> +    description: Payload transport window offset2 of each
>>> +                 data port. Out ports followed by In ports.
>>> +                 Value of 0xFF indicates that this option is not implemented
>>> +                 or applicable for the respective data port.
>>> +                 More info in MIPI Alliance SoundWire 1.0 Specifications.
>>> +    minItems: 3
>>> +    maxItems: 8
>>> +
>>> +  qcom,ports-lane-control:
>>> +    $ref: /schemas/types.yaml#/definitions/uint8-array
>>> +    description: Identify which data lane the data port uses.
>>> +                 Out ports followed by In ports.
>>> +                 Value of 0xFF indicates that this option is not implemented
>>> +                 or applicable for the respective data port.
>>> +                 More info in MIPI Alliance SoundWire 1.0 Specifications.
>>> +    minItems: 3
>>> +    maxItems: 5
>>> +
>>> +  qcom,ports-block-pack-mode:
>>> +    $ref: /schemas/types.yaml#/definitions/uint8-array
>>> +    description: Indicate the block packing mode.
>>> +                 0 to indicate Blocks are per Channel
>>> +                 1 to indicate Blocks are per Port.
>>> +                 Out ports followed by In ports.
>>> +                 Value of 0xFF indicates that this option is not implemented
>>> +                 or applicable for the respective data port.
>>> +                 More info in MIPI Alliance SoundWire 1.0 Specifications.
>>> +    minItems: 3
>>> +    maxItems: 8
>>> +
>>> +  qcom,ports-hstart:
>>> +    $ref: /schemas/types.yaml#/definitions/uint8-array
>>> +    description: Identifying lowerst numbered coloum in
>>> +                 SoundWire Frame, i.e. left edge of the Transport sub-frame
>>> +                 for each port. Values between 0 and 15 are valid.
>>> +                 Out ports followed by In ports.
>>> +                 Value of 0xFF indicates that this option is not implemented
>>> +                 or applicable for the respective data port.
>>> +                 More info in MIPI Alliance SoundWire 1.0 Specifications.
>>> +    minItems: 3
>>> +    maxItems: 5
>>> +
>>> +  qcom,ports-hstop:
>>> +    $ref: /schemas/types.yaml#/definitions/uint8-array
>>> +    description: Identifying highest numbered coloum in
>>> +                 SoundWire Frame, i.e. the right edge of the Transport
>>> +                 sub-frame for each port. Values between 0 and 15 are valid.
>>> +                 Out ports followed by In ports.
>>> +                 Value of 0xFF indicates that this option is not implemented
>>> +                 or applicable for the respective data port.
>>> +                 More info in MIPI Alliance SoundWire 1.0 Specifications.
>>> +    minItems: 3
>>> +    maxItems: 5
>>> +
>>> +  qcom,ports-block-group-count:
>>> +    $ref: /schemas/types.yaml#/definitions/uint8-array
>>> +    description: In range 1 to 4 to indicate how many sample
>>> +                 intervals are combined into a payload.
>>> +                 Out ports followed by In ports.
>>> +                 Value of 0xFF indicates that this option is not implemented
>>> +                 or applicable for the respective data port.
>>> +                 More info in MIPI Alliance SoundWire 1.0 Specifications.
>>> +    minItems: 3
>>> +    maxItems: 5
>>> +
>>> +  label:
>>> +    maxItems: 1
>>> +
>>> +patternProperties:
>>> +  "^.*@[0-9a-f],[0-9a-f]$":
>>> +    type: object
>> You should have here a description.
> 
> Bit confusion Here. In any of examples there is no description for 
> patternProperties.

That's interesting, let's check:
$ git grep -C 4 patternProperties -- Documentation/devicetree/bindings/

First has description, second does not have, third has, 4th has, 5th
has, 6th has, 7th has, 8th has.

So from all first 8 entries, only one did not have. When the objects are
obvious or are a standard properties, the description could be skipped,
but in regular cases description is expected. Just like for every custom
property.

> You mean, description for below compatible property?

No, description on the level of type: object.


> 
>>
>>> +    properties:
>>> +      compatible:
>>> +        pattern: "^sdw[0-9a-f]{1}[0-9a-f]{4}[0-9a-f]{4}[0-9a-f]{2}$"
>>> +
>>> +required:
>>> +  - compatible
>>> +  - reg
>>> +  - interrupts
>>> +  - clocks
>>> +  - clock-names
>>> +  - '#sound-dai-cells'
>>> +  - '#address-cells'
>>> +  - '#size-cells'
>>> +  - qcom,dout-ports
>>> +  - qcom,din-ports
>>> +  - qcom,ports-sinterval-low
>>> +  - qcom,ports-offset1
>>> +  - qcom,ports-offset2
>>> +
>>> +additionalProperties: false
>>> +
>>> +examples:
>>> +  - |
>>> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
>>> +    #include <dt-bindings/interrupt-controller/irq.h>
>>> +    #include <dt-bindings/clock/qcom,lpassaudiocc-sc7280.h>
>>> +
>>> +    soundwire@3210000 {
>>> +        compatible = "qcom,soundwire-v1.6.0";
>>> +        reg = <0x03210000 0x2000>;
>>> +
>>> +        interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
>>> +                     <&pdc 130 IRQ_TYPE_LEVEL_HIGH>;
>>> +
>>> +        interrupt-names = "core";
>> Does not look like you tested the bindings. Please run `make
>> dt_binding_check` (see
>> Documentation/devicetree/bindings/writing-schema.rst for instructions).
> Tested bindings and didn't see any issues on my setup. will do cross check.

You have two interrupts but only one name.

Best regards,
Krzysztof




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux