On Mon, Nov 07, 2022 at 07:59:30PM +0100, Krzysztof Kozlowski wrote:
> Convert Qualcomm MSM8660 pin controller bindings to DT schema. Keep the
> parsing of pin configuration subnodes consistent with other Qualcomm
> schemas (children named with '-state' suffix, their children with
> '-pins').
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
Reviewed-by: Bjorn Andersson <andersson@xxxxxxxxxx>
Regards,
Bjorn
> ---
> .../bindings/pinctrl/qcom,msm8660-pinctrl.txt | 96 --------------
> .../pinctrl/qcom,msm8660-pinctrl.yaml | 125 ++++++++++++++++++
> 2 files changed, 125 insertions(+), 96 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,msm8660-pinctrl.txt
> create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,msm8660-pinctrl.yaml
>
> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8660-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,msm8660-pinctrl.txt
> deleted file mode 100644
> index f095209848c8..000000000000
> --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8660-pinctrl.txt
> +++ /dev/null
> @@ -1,96 +0,0 @@
> -Qualcomm MSM8660 TLMM block
> -
> -Required properties:
> -- compatible: "qcom,msm8660-pinctrl"
> -- reg: Should be the base address and length of the TLMM block.
> -- interrupts: Should be the parent IRQ of the TLMM block.
> -- interrupt-controller: Marks the device node as an interrupt controller.
> -- #interrupt-cells: Should be two.
> -- gpio-controller: Marks the device node as a GPIO controller.
> -- #gpio-cells : Should be two.
> - The first cell is the gpio pin number and the
> - second cell is used for optional parameters.
> -- gpio-ranges: see ../gpio/gpio.txt
> -
> -Optional properties:
> -
> -- gpio-reserved-ranges: see ../gpio/gpio.txt
> -
> -Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for
> -a general description of GPIO and interrupt bindings.
> -
> -Please refer to pinctrl-bindings.txt in this directory for details of the
> -common pinctrl bindings used by client devices, including the meaning of the
> -phrase "pin configuration node".
> -
> -Qualcomm's pin configuration nodes act as a container for an arbitrary number of
> -subnodes. Each of these subnodes represents some desired configuration for a
> -pin, a group, or a list of pins or groups. This configuration can include the
> -mux function to select on those pin(s)/group(s), and various pin configuration
> -parameters, such as pull-up, drive strength, etc.
> -
> -The name of each subnode is not important; all subnodes should be enumerated
> -and processed purely based on their content.
> -
> -Each subnode only affects those parameters that are explicitly listed. In
> -other words, a subnode that lists a mux function but no pin configuration
> -parameters implies no information about any pin configuration parameters.
> -Similarly, a pin subnode that describes a pullup parameter implies no
> -information about e.g. the mux function.
> -
> -
> -The following generic properties as defined in pinctrl-bindings.txt are valid
> -to specify in a pin configuration subnode:
> -
> - pins, function, bias-disable, bias-pull-down, bias-pull-up, drive-strength,
> - output-low, output-high.
> -
> -Non-empty subnodes must specify the 'pins' property.
> -
> -Valid values for pins are:
> - gpio0-gpio172, sdc3_clk, sdc3_cmd, sdc3_data sdc4_clk, sdc4_cmd, sdc4_data
> -
> -Valid values for function are:
> - gpio, cam_mclk, dsub, ext_gps, gp_clk_0a, gp_clk_0b, gp_clk_1a, gp_clk_1b,
> - gp_clk_2a, gp_clk_2b, gp_mn, gsbi1, gsbi1_spi_cs1_n, gsbi1_spi_cs2a_n,
> - gsbi1_spi_cs2b_n, gsbi1_spi_cs3_n, gsbi2, gsbi2_spi_cs1_n, gsbi2_spi_cs2_n,
> - gsbi2_spi_cs3_n, gsbi3, gsbi3_spi_cs1_n, gsbi3_spi_cs2_n, gsbi3_spi_cs3_n,
> - gsbi4, gsbi5, gsbi6, gsbi7, gsbi8, gsbi9, gsbi10, gsbi11, gsbi12, hdmi, i2s,
> - lcdc, mdp_vsync, mi2s, pcm, ps_hold, sdc1, sdc2, sdc5, tsif1, tsif2, usb_fs1,
> - usb_fs1_oe_n, usb_fs2, usb_fs2_oe_n, vfe, vsens_alarm, ebi2, ebi2cs
> -
> -Example:
> -
> - msmgpio: pinctrl@800000 {
> - compatible = "qcom,msm8660-pinctrl";
> - reg = <0x800000 0x4000>;
> -
> - gpio-controller;
> - #gpio-cells = <2>;
> - gpio-ranges = <&msmgpio 0 0 173>;
> - interrupt-controller;
> - #interrupt-cells = <2>;
> - interrupts = <0 16 0x4>;
> -
> - pinctrl-names = "default";
> - pinctrl-0 = <&gsbi12_uart>;
> -
> - gsbi12_uart: gsbi12-uart {
> - mux {
> - pins = "gpio117", "gpio118";
> - function = "gsbi12";
> - };
> -
> - tx {
> - pins = "gpio118";
> - drive-strength = <8>;
> - bias-disable;
> - };
> -
> - rx {
> - pins = "gpio117";
> - drive-strength = <2>;
> - bias-pull-up;
> - };
> - };
> - };
> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8660-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8660-pinctrl.yaml
> new file mode 100644
> index 000000000000..ad0cad4694c0
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8660-pinctrl.yaml
> @@ -0,0 +1,125 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pinctrl/qcom,msm8660-pinctrl.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm MSM8660 TLMM pin controller
> +
> +maintainers:
> + - Bjorn Andersson <andersson@xxxxxxxxxx>
> + - Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
> +
> +description:
> + Top Level Mode Multiplexer pin controller in Qualcomm MSM8660 SoC.
> +
> +properties:
> + compatible:
> + const: qcom,msm8660-pinctrl
> +
> + reg:
> + maxItems: 1
> +
> + interrupts: true
> + interrupt-controller: true
> + "#interrupt-cells": true
> + gpio-controller: true
> + "#gpio-cells": true
> + gpio-ranges: true
> + wakeup-parent: true
> +
> + gpio-reserved-ranges:
> + minItems: 1
> + maxItems: 86
> +
> + gpio-line-names:
> + maxItems: 173
> +
> +patternProperties:
> + "-state$":
> + oneOf:
> + - $ref: "#/$defs/qcom-msm8660-tlmm-state"
> + - patternProperties:
> + "-pins$":
> + $ref: "#/$defs/qcom-msm8660-tlmm-state"
> + additionalProperties: false
> +
> +$defs:
> + qcom-msm8660-tlmm-state:
> + type: object
> + description:
> + Pinctrl node's client devices use subnodes for desired pin configuration.
> + Client device subnodes use below standard properties.
> + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
> +
> + properties:
> + pins:
> + description:
> + List of gpio pins affected by the properties specified in this
> + subnode.
> + items:
> + oneOf:
> + - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-6][0-9]|17[0-2])$"
> + - enum: [ sdc3_clk, sdc3_cmd, sdc3_data, sdc4_clk, sdc4_cmd, sdc4_data ]
> + minItems: 1
> + maxItems: 36
> +
> + function:
> + description:
> + Specify the alternative function to be configured for the specified
> + pins.
> +
> + enum: [ gpio, cam_mclk, dsub, ext_gps, gp_clk_0a, gp_clk_0b, gp_clk_1a,
> + gp_clk_1b, gp_clk_2a, gp_clk_2b, gp_mn, gsbi1, gsbi1_spi_cs1_n,
> + gsbi1_spi_cs2a_n, gsbi1_spi_cs2b_n, gsbi1_spi_cs3_n, gsbi2,
> + gsbi2_spi_cs1_n, gsbi2_spi_cs2_n, gsbi2_spi_cs3_n, gsbi3,
> + gsbi3_spi_cs1_n, gsbi3_spi_cs2_n, gsbi3_spi_cs3_n, gsbi4,
> + gsbi5, gsbi6, gsbi7, gsbi8, gsbi9, gsbi10, gsbi11, gsbi12,
> + hdmi, i2s, lcdc, mdp_vsync, mi2s, pcm, ps_hold, sdc1, sdc2,
> + sdc5, tsif1, tsif2, usb_fs1, usb_fs1_oe_n, usb_fs2,
> + usb_fs2_oe_n, vfe, vsens_alarm, ebi2, ebi2cs ]
> +
> +
> + bias-pull-down: true
> + bias-pull-up: true
> + bias-disable: true
> + drive-strength: true
> + input-enable: true
> + output-high: true
> + output-low: true
> +
> + required:
> + - pins
> +
> + additionalProperties: false
> +
> +allOf:
> + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
> +
> +required:
> + - compatible
> + - reg
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + tlmm: pinctrl@800000 {
> + compatible = "qcom,msm8660-pinctrl";
> + reg = <0x800000 0x4000>;
> +
> + gpio-controller;
> + gpio-ranges = <&tlmm 0 0 173>;
> + #gpio-cells = <2>;
> + interrupts = <0 16 0x4>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> +
> + gsbi3-i2c-state {
> + pins = "gpio43", "gpio44";
> + function = "gsbi3";
> + drive-strength = <8>;
> + bias-disable;
> + };
> + };
> --
> 2.34.1
>
