Re: [PATCH] arm64: dts: qcom: sc8280xp: fix USB MP QMP PHY nodes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Nov 07, 2022 at 09:17:05AM +0100, Johan Hovold wrote:
> Update the USB MP QMP PHY nodes to match the new binding which
> specifically includes the missing register regions (e.g. PCS_USB).
> 
> Signed-off-by: Johan Hovold <johan+linaro@xxxxxxxxxx>

Reviewed-by: Andrew Halaney <ahalaney@xxxxxxxxxx>

Address region matches downstream, and with this change in place
make CHECK_DTBS=y qcom/sa8295p-adp.dtb no longer complains about
the node failing to follow the dt-bindings.

Thanks,
Andrew

> ---
> 
> The corresponding binding and driver fixes are now in linux-next so that
> the devicetree can be updated. [1]
> 
> Note that there's yet no support for the multiport controller in
> mainline.
> 
> Johan
> 
> [1] https://lore.kernel.org/lkml/20221028160435.26948-1-johan+linaro@xxxxxxxxxx/
> 
> 
>  arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 62 ++++++++++----------------
>  1 file changed, 24 insertions(+), 38 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> index 1b309fa93484..506172206b8a 100644
> --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> @@ -1090,70 +1090,56 @@ usb_2_hsphy3: phy@88ea000 {
>  			status = "disabled";
>  		};
>  
> -		usb_2_qmpphy0: phy-wrapper@88ef000 {
> +		usb_2_qmpphy0: phy@88ef000 {
>  			compatible = "qcom,sc8280xp-qmp-usb3-uni-phy";
> -			reg = <0 0x088ef000 0 0x1c8>;
> -			#address-cells = <2>;
> -			#size-cells = <2>;
> -			ranges;
> +			reg = <0 0x088ef000 0 0x2000>;
>  
>  			clocks = <&gcc GCC_USB3_MP_PHY_AUX_CLK>,
>  				 <&rpmhcc RPMH_CXO_CLK>,
>  				 <&gcc GCC_USB3_MP0_CLKREF_CLK>,
> -				 <&gcc GCC_USB3_MP_PHY_COM_AUX_CLK>;
> -			clock-names = "aux", "ref_clk_src", "ref", "com_aux";
> +				 <&gcc GCC_USB3_MP_PHY_COM_AUX_CLK>,
> +				 <&gcc GCC_USB3_MP_PHY_PIPE_0_CLK>;
> +			clock-names = "aux", "ref_clk_src", "ref", "com_aux",
> +				      "pipe";
>  
>  			resets = <&gcc GCC_USB3_UNIPHY_MP0_BCR>,
>  				 <&gcc GCC_USB3UNIPHY_PHY_MP0_BCR>;
> -			reset-names = "phy", "common";
> +			reset-names = "phy", "phy_phy";
>  
>  			power-domains = <&gcc USB30_MP_GDSC>;
>  
> -			status = "disabled";
> +			#clock-cells = <0>;
> +			clock-output-names = "usb2_phy0_pipe_clk";
>  
> -			usb_2_ssphy0: phy@88efe00 {
> -				reg = <0 0x088efe00 0 0x160>,
> -				      <0 0x088f0000 0 0x1ec>,
> -				      <0 0x088ef200 0 0x1f0>;
> -				#phy-cells = <0>;
> -				#clock-cells = <0>;
> -				clocks = <&gcc GCC_USB3_MP_PHY_PIPE_0_CLK>;
> -				clock-names = "pipe0";
> -				clock-output-names = "usb2_phy0_pipe_clk";
> -			};
> +			#phy-cells = <0>;
> +
> +			status = "disabled";
>  		};
>  
> -		usb_2_qmpphy1: phy-wrapper@88f1000 {
> +		usb_2_qmpphy1: phy@88f1000 {
>  			compatible = "qcom,sc8280xp-qmp-usb3-uni-phy";
> -			reg = <0 0x088f1000 0 0x1c8>;
> -			#address-cells = <2>;
> -			#size-cells = <2>;
> -			ranges;
> +			reg = <0 0x088f1000 0 0x2000>;
>  
>  			clocks = <&gcc GCC_USB3_MP_PHY_AUX_CLK>,
>  				 <&rpmhcc RPMH_CXO_CLK>,
>  				 <&gcc GCC_USB3_MP1_CLKREF_CLK>,
> -				 <&gcc GCC_USB3_MP_PHY_COM_AUX_CLK>;
> -			clock-names = "aux", "ref_clk_src", "ref", "com_aux";
> +				 <&gcc GCC_USB3_MP_PHY_COM_AUX_CLK>,
> +				 <&gcc GCC_USB3_MP_PHY_PIPE_1_CLK>;
> +			clock-names = "aux", "ref_clk_src", "ref", "com_aux",
> +				      "pipe";
>  
>  			resets = <&gcc GCC_USB3_UNIPHY_MP1_BCR>,
>  				 <&gcc GCC_USB3UNIPHY_PHY_MP1_BCR>;
> -			reset-names = "phy", "common";
> +			reset-names = "phy", "phy_phy";
>  
>  			power-domains = <&gcc USB30_MP_GDSC>;
>  
> -			status = "disabled";
> +			#clock-cells = <0>;
> +			clock-output-names = "usb2_phy1_pipe_clk";
>  
> -			usb_2_ssphy1: phy@88f1e00 {
> -				reg = <0 0x088f1e00 0 0x160>,
> -				      <0 0x088f2000 0 0x1ec>,
> -				      <0 0x088f1200 0 0x1f0>;
> -				#phy-cells = <0>;
> -				#clock-cells = <0>;
> -				clocks = <&gcc GCC_USB3_MP_PHY_PIPE_1_CLK>;
> -				clock-names = "pipe0";
> -				clock-output-names = "usb2_phy1_pipe_clk";
> -			};
> +			#phy-cells = <0>;
> +
> +			status = "disabled";
>  		};
>  
>  		remoteproc_adsp: remoteproc@3000000 {
> -- 
> 2.37.4
> 




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux