Switch '//' comments to C-style /* */ and fix up the contents of some. Make sure all multiline C-style commends begin with just '/*' with the comment text starting on a new line. Also, fix up a single raw '2' to PM8994_GPIO_S4 while at it. Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx> --- arch/arm64/boot/dts/qcom/apq8096-db820c.dts | 14 +++++++------- arch/arm64/boot/dts/qcom/msm8996.dtsi | 3 ++- 2 files changed, 9 insertions(+), 8 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts index 7f10372178d6..6ad7e5c78ae1 100644 --- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts +++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts @@ -560,7 +560,7 @@ pinconf { pins = "gpio5"; function = PMIC_GPIO_FUNC_NORMAL; output-low; - power-source = <2>; // PM8994_GPIO_S4, 1.8V + power-source = <PM8994_GPIO_S4>; /* 1.8V */ }; }; @@ -569,7 +569,7 @@ pinconf { pins = "gpio19"; function = PMIC_GPIO_FUNC_NORMAL; output-low; - power-source = <PM8994_GPIO_S4>; // 1.8V + power-source = <PM8994_GPIO_S4>; /* 1.8V */ qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; bias-pull-down; }; @@ -580,7 +580,7 @@ pinconf { pins = "gpio8"; function = PMIC_GPIO_FUNC_NORMAL; output-low; - power-source = <PM8994_GPIO_S4>; // 1.8V + power-source = <PM8994_GPIO_S4>; /* 1.8V */ qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; bias-pull-down; }; @@ -590,7 +590,7 @@ audio_mclk: clk-div1-state { pinconf { pins = "gpio15"; function = "func1"; - power-source = <PM8994_GPIO_S4>; // 1.8V + power-source = <PM8994_GPIO_S4>; /* 1.8V */ }; }; @@ -602,7 +602,7 @@ pinconf { drive-push-pull; bias-pull-up; qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; - power-source = <PM8994_GPIO_S4>; // 1.8V + power-source = <PM8994_GPIO_S4>; /* 1.8V */ }; }; @@ -623,7 +623,7 @@ pinconf { input-enable; bias-pull-down; qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; - power-source = <PM8994_GPIO_S4>; // 1.8V + power-source = <PM8994_GPIO_S4>; /* 1.8V */ }; }; }; @@ -679,7 +679,7 @@ pinconf { input-enable; bias-pull-down; qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; - power-source = <PM8994_GPIO_S4>; // 1.8V + power-source = <PM8994_GPIO_S4>; /* 1.8V */ }; }; }; diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index df0f67c223bb..4dccde54dd2f 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -1,5 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only -/* Copyright (c) 2014-2015, The Linux Foundation. All rights reserved. +/* + * Copyright (c) 2014-2015, The Linux Foundation. All rights reserved. */ #include <dt-bindings/interrupt-controller/arm-gic.h> -- 2.38.1