Il 04/11/22 15:09, Guillaume Ranquet ha scritto:
Add HDMI audio support for v2
Signed-off-by: Guillaume Ranquet <granquet@xxxxxxxxxxxx>
---
drivers/gpu/drm/mediatek/mtk_hdmi_common.c | 1 +
drivers/gpu/drm/mediatek/mtk_hdmi_ddc_v2.c | 2 +-
drivers/gpu/drm/mediatek/mtk_hdmi_v2.c | 213 +++++++++++++++++++++++++++++
drivers/gpu/drm/mediatek/mtk_hdmi_v2.h | 2 +
4 files changed, 217 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/mediatek/mtk_hdmi_common.c b/drivers/gpu/drm/mediatek/mtk_hdmi_common.c
index e43c938a9aa5..1ea91f8bb6c7 100644
--- a/drivers/gpu/drm/mediatek/mtk_hdmi_common.c
+++ b/drivers/gpu/drm/mediatek/mtk_hdmi_common.c
@@ -386,6 +386,7 @@ static const struct mtk_hdmi_conf mtk_hdmi_conf_v2 = {
.mtk_hdmi_output_init = mtk_hdmi_output_init_v2,
.mtk_hdmi_clk_disable = mtk_hdmi_clk_disable_v2,
.mtk_hdmi_clk_enable = mtk_hdmi_clk_enable_v2,
+ .set_hdmi_codec_pdata = set_hdmi_codec_pdata_v2,
Keep naming consistent please:
.mtk_hdmi_set_codec_pdata = mtk_hdmi_set_codec_pdata_v2,
.mtk_hdmi_clock_names = mtk_hdmi_clk_names_v2,
.num_clocks = MTK_HDMIV2_CLK_COUNT,
};
diff --git a/drivers/gpu/drm/mediatek/mtk_hdmi_ddc_v2.c b/drivers/gpu/drm/mediatek/mtk_hdmi_ddc_v2.c
index 61696d255e51..26456802a5c4 100644
--- a/drivers/gpu/drm/mediatek/mtk_hdmi_ddc_v2.c
+++ b/drivers/gpu/drm/mediatek/mtk_hdmi_ddc_v2.c
@@ -309,7 +309,7 @@ static int mtk_hdmi_ddc_probe(struct platform_device *pdev)
ddc->regs = device_node_to_regmap(hdmi);
of_node_put(hdmi);
if (IS_ERR(ddc->regs))
- return dev_err_probe(dev, PTR_ERR(ddc->regs), "Unable to get mt8195-hdmi syscon");
+ return dev_err_probe(dev, PTR_ERR(ddc->regs), "Unable to get hdmi syscon");
You might as well do the rename in the commit that actually introduces this file,
since you're doing that in the same series.
Please do so.
ddc->clk = devm_clk_get_enabled(dev, "ddc");
if (IS_ERR(ddc->clk))
diff --git a/drivers/gpu/drm/mediatek/mtk_hdmi_v2.c b/drivers/gpu/drm/mediatek/mtk_hdmi_v2.c
index e8457429964d..b391b22fa9f5 100644
--- a/drivers/gpu/drm/mediatek/mtk_hdmi_v2.c
+++ b/drivers/gpu/drm/mediatek/mtk_hdmi_v2.c
@@ -211,6 +211,26 @@ static void mtk_hdmi_hw_vid_black(struct mtk_hdmi *hdmi, bool black)
mtk_hdmi_mask(hdmi, TOP_VMUTE_CFG1, 0, REG_VMUTE_EN);
}
+static void mtk_hdmi_hw_aud_mute(struct mtk_hdmi *hdmi)
+{
+ u32 val;
+
+ val = mtk_hdmi_read(hdmi, AIP_CTRL, &val);
+
+ if (val & DSD_EN)
+ mtk_hdmi_mask(hdmi, AIP_TXCTRL,
+ DSD_MUTE_DATA | AUD_MUTE_FIFO_EN,
I think I already gave you some advice to shorten this in an earlier
series version.
Besides, you can also use the FIELD_PREP() macro here, and please use it.
P.S.:
val = FIELD_PREP(... something AUD_MUTE_FIFO_EN);
if (val & DSD_EN)
val |= FIELD_PREP( ... something DSD_MUTE_DATA)
mtk_hdmi_mask(hdmi, AIP_TXCTRL, val, val);
+ DSD_MUTE_DATA | AUD_MUTE_FIFO_EN);
+ else
+ mtk_hdmi_mask(hdmi, AIP_TXCTRL, AUD_MUTE_FIFO_EN,
+ AUD_MUTE_FIFO_EN);
+}
+
+static void mtk_hdmi_hw_aud_unmute(struct mtk_hdmi *hdmi)
+{
+ mtk_hdmi_mask(hdmi, AIP_TXCTRL, AUD_MUTE_DIS, AUD_MUTE_FIFO_EN);
+}
+
static void mtk_hdmi_hw_reset(struct mtk_hdmi *hdmi)
{
mtk_hdmi_mask(hdmi, HDMITX_CONFIG, 0x0, HDMITX_SW_RSTB);
@@ -889,6 +909,7 @@ static void mtk_hdmi_audio_reset(struct mtk_hdmi *hdmi, bool rst)
..snip..
@@ -935,6 +957,28 @@ static void mtk_hdmi_reset_colorspace_setting(struct mtk_hdmi *hdmi)
hdmi->ycc_quantization_range = HDMI_YCC_QUANTIZATION_RANGE_LIMITED;
}
+static void mtk_hdmi_audio_enable(struct mtk_hdmi *hdmi)
These two functions are used only in one function (each)... so you don't
need them. Just move the two lines in mtk_hdmi_audio_startup() ...
+{
+ mtk_hdmi_aud_enable_packet(hdmi, true);
+ hdmi->audio_enable = true;
+}
+
+static void mtk_hdmi_audio_disable(struct mtk_hdmi *hdmi)
+{
... and in mtk_hdmi_audio_shutdown().
+ mtk_hdmi_aud_enable_packet(hdmi, false);
+ hdmi->audio_enable = false;
+}
+
+static void mtk_hdmi_audio_set_param(struct mtk_hdmi *hdmi,
+ struct hdmi_audio_param *param)
+{
+ if (!hdmi->audio_enable)
+ return;
+
+ memcpy(&hdmi->aud_param, param, sizeof(*param));
+ mtk_hdmi_aud_output_config(hdmi, &hdmi->mode);
+}
+
static void mtk_hdmi_change_video_resolution(struct mtk_hdmi *hdmi)
{
bool is_over_340M = false;
..snip..
+
+static int mtk_hdmi_audio_mute(struct device *dev, void *data, bool enable,
+ int direction)
+{
+ struct mtk_hdmi *hdmi = dev_get_drvdata(dev);
+
+ if (direction != SNDRV_PCM_STREAM_PLAYBACK)
Why aren't you returning an error here?
If this is really supposed to be like that, please add a comment in the code
explaining the reason, so that the next person reading this won't mistakenly
change that.
+ return 0;
+
+ if (enable)
+ mtk_hdmi_hw_aud_mute(hdmi);
+ else
+ mtk_hdmi_hw_aud_unmute(hdmi);
+
+ return 0;
+}
+
Regards,
Angelo
