Reference to pinfunc.h was wrong. Fix it.
Cc: Giulio Benetti <giulio.benetti@xxxxxxxxxxxxxxxxxxxxxx>
Signed-off-by: Jesse Taube <Mr.Bossman075@xxxxxxxxx>
---
Documentation/devicetree/bindings/pinctrl/fsl,imxrt1050.yaml | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imxrt1050.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,imxrt1050.yaml
index 1278f7293560..db5fe66ad873 100644
--- a/Documentation/devicetree/bindings/pinctrl/fsl,imxrt1050.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,imxrt1050.yaml
@@ -35,7 +35,7 @@ patternProperties:
each entry consists of 6 integers and represents the mux and config
setting for one pin. The first 5 integers <mux_reg conf_reg input_reg
mux_val input_val> are specified using a PIN_FUNC_ID macro, which can
- be found in <include/dt-bindings/pinctrl/pins-imxrt1050.h>. The last
+ be found in <arch/arm/boot/dts/imxrt1050-pinfunc.h>. The last
integer CONFIG is the pad setting value like pull-up on this pin. Please
refer to i.MXRT1050 Reference Manual for detailed CONFIG settings.
$ref: /schemas/types.yaml#/definitions/uint32-matrix
--
2.37.2
