The following series of patches enables RPi header on j721e sk. It is a
40 pin io expansion header which brings out i2c5, ehrpwm 2,3 and some pins
of gpio 0,1
v8:
- Fixed the wraparound scheme in commit messages to 75 characters
- Added explanation in 1 for why the nodes are disabled
v7:
- Rebased to next-20221103
- Move setting status diable to main dtsi
v6:
- Rebased to 6.1-rc1
v5:
- Enable only gpio's and i2c on the RPi Header
as per the discussion in the v4
v4:
- Correct the node name in dt binding example
v3:
- Change node name from clock to clock-controller
- Add correct description for clock-controller node
v2:
- Add full path for clock property $ref
- Remove the discription for clock pattern property,
since $ref is added
- Remove the label in the example
- Fix the indentation in the example
Rahul T R (1):
arm64: dts: ti: k3-j721e-sk: Add pinmux for RPi Header
Vijay Pothukuchi (1):
arm64: dts: ti: k3-j721e-main: Add dts nodes for EHRPWMs
arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 68 ++++++++++++++++++++++-
arch/arm64/boot/dts/ti/k3-j721e-sk.dts | 59 ++++++++++++++++++++
2 files changed, 126 insertions(+), 1 deletion(-)
--
2.38.0
