On Sun, Nov 6, 2022 at 11:15 AM Chen-Yu Tsai <wens@xxxxxxxxxx> wrote:
>
> From: Chen-Yu Tsai <wens@xxxxxxxx>
>
> Ths PMIC's interrupt line is tied to GPIO0_A3. This is described
> correctly for the pinmux setting, but incorrectly for the interrupt.
>
> Correct the interrupt setting so that interrupts from the PMIC get
> delivered.
>
> Fixes: dcc8c66bef79 ("arm64: dts: rockchip: add Pine64 Quartz64-B device tree")
> Signed-off-by: Chen-Yu Tsai <wens@xxxxxxxx>
Good catch, thanks!
Reviewed-by: Peter Geis <pgwipeout@xxxxxxxxx>
> ---
> arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts
> index 77b179cd20e7..b276eb0810c7 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts
> +++ b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts
> @@ -246,7 +246,7 @@ rk809: pmic@20 {
> compatible = "rockchip,rk809";
> reg = <0x20>;
> interrupt-parent = <&gpio0>;
> - interrupts = <RK_PA7 IRQ_TYPE_LEVEL_LOW>;
> + interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
> assigned-clocks = <&cru I2S1_MCLKOUT_TX>;
> assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;
> clock-names = "mclk";
> --
> 2.34.1
>
>
> _______________________________________________
> Linux-rockchip mailing list
> Linux-rockchip@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/linux-rockchip
