[PATCH v2 04/10] clk: sunxi-ng: f1c100s: Add IR mod clock

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



For some reason the mod clock for the Allwinner F1C100s CIR (infrared
receiver) peripheral was not modeled in the CCU driver.

Add the clock description to the list, and wire it up in the clock list.
By assigning a new clock ID at the end, it extends the number of clocks.

This allows to use the CIR peripheral on any F1C100s series board.

Signed-off-by: Andre Przywara <andre.przywara@xxxxxxx>
---
 drivers/clk/sunxi-ng/ccu-suniv-f1c100s.c      | 11 ++++++++++-
 drivers/clk/sunxi-ng/ccu-suniv-f1c100s.h      |  2 +-
 include/dt-bindings/clock/suniv-ccu-f1c100s.h |  2 ++
 3 files changed, 13 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/sunxi-ng/ccu-suniv-f1c100s.c b/drivers/clk/sunxi-ng/ccu-suniv-f1c100s.c
index ed097c4f780f..0d5b60b123b7 100644
--- a/drivers/clk/sunxi-ng/ccu-suniv-f1c100s.c
+++ b/drivers/clk/sunxi-ng/ccu-suniv-f1c100s.c
@@ -239,7 +239,14 @@ static SUNXI_CCU_MUX_WITH_GATE(i2s_clk, "i2s", i2s_spdif_parents,
 static SUNXI_CCU_MUX_WITH_GATE(spdif_clk, "spdif", i2s_spdif_parents,
 			       0x0b4, 16, 2, BIT(31), 0);
 
-/* The BSP header file has a CIR_CFG, but no mod clock uses this definition */
+static const char * const ir_parents[] = { "osc32k", "osc24M" };
+static SUNXI_CCU_MP_WITH_MUX_GATE(ir_clk, "ir",
+				  ir_parents, 0x0b8,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,        /* mux */
+				  BIT(31),      /* gate */
+				  0);
 
 static SUNXI_CCU_GATE(usb_phy0_clk,	"usb-phy0",	"osc24M",
 		      0x0cc, BIT(1), 0);
@@ -355,6 +362,7 @@ static struct ccu_common *suniv_ccu_clks[] = {
 	&mmc1_output_clk.common,
 	&i2s_clk.common,
 	&spdif_clk.common,
+	&ir_clk.common,
 	&usb_phy0_clk.common,
 	&dram_ve_clk.common,
 	&dram_csi_clk.common,
@@ -446,6 +454,7 @@ static struct clk_hw_onecell_data suniv_hw_clks = {
 		[CLK_MMC1_OUTPUT]	= &mmc1_output_clk.common.hw,
 		[CLK_I2S]		= &i2s_clk.common.hw,
 		[CLK_SPDIF]		= &spdif_clk.common.hw,
+		[CLK_IR]		= &ir_clk.common.hw,
 		[CLK_USB_PHY0]		= &usb_phy0_clk.common.hw,
 		[CLK_DRAM_VE]		= &dram_ve_clk.common.hw,
 		[CLK_DRAM_CSI]		= &dram_csi_clk.common.hw,
diff --git a/drivers/clk/sunxi-ng/ccu-suniv-f1c100s.h b/drivers/clk/sunxi-ng/ccu-suniv-f1c100s.h
index b22484f1bb9a..d56a4316289d 100644
--- a/drivers/clk/sunxi-ng/ccu-suniv-f1c100s.h
+++ b/drivers/clk/sunxi-ng/ccu-suniv-f1c100s.h
@@ -29,6 +29,6 @@
 
 /* All bus gates, DRAM gates and mod clocks are exported */
 
-#define CLK_NUMBER		(CLK_AVS + 1)
+#define CLK_NUMBER		(CLK_IR + 1)
 
 #endif /* _CCU_SUNIV_F1C100S_H_ */
diff --git a/include/dt-bindings/clock/suniv-ccu-f1c100s.h b/include/dt-bindings/clock/suniv-ccu-f1c100s.h
index f5ac155c9c70..d7570765f424 100644
--- a/include/dt-bindings/clock/suniv-ccu-f1c100s.h
+++ b/include/dt-bindings/clock/suniv-ccu-f1c100s.h
@@ -67,4 +67,6 @@
 #define CLK_CODEC		65
 #define CLK_AVS			66
 
+#define CLK_IR			67
+
 #endif
-- 
2.35.5




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux