From: Nick Hawkins <nick.hawkins@xxxxxxx> The GXP SoC can support up to 16 fans through the interface provided by the CPLD. The fans speeds are controlled via a pwm value 0-255. The fans are also capable of reporting if they have failed to the CPLD which in turn reports the status to the GXP SoC. Based on previous feedback the registers required for fan control have been regmaped individualy to fan driver. Specifically these registers are the function 2 registers and the programmable logic registers from the CPLD. Additionally in this patchset there is support for the SPI driver which already exists as spi-gxp.c in the SPI driver. Nick Hawkins (6): hwmon: (gxp-fan-ctrl) Add GXP fan controller ABI: sysfs-class-hwmon: add a description for fanY_fault dt-bindings: hwmon: Add hpe,gxp-fan-ctrl ARM: dts: add GXP Support for fans and SPI ARM: multi_v7_defconfig: Add GXP Fan and SPI support MAINTAINERS: add gxp fan controller and documents Documentation/ABI/testing/sysfs-class-hwmon | 9 + .../bindings/hwmon/hpe,gxp-fan-ctrl.yaml | 41 ++ Documentation/hwmon/gxp-fan-ctrl.rst | 36 ++ MAINTAINERS | 2 + arch/arm/boot/dts/hpe-bmc-dl360gen10.dts | 58 +++ arch/arm/boot/dts/hpe-gxp.dtsi | 64 +++- arch/arm/configs/multi_v7_defconfig | 2 + drivers/hwmon/Kconfig | 8 + drivers/hwmon/Makefile | 1 + drivers/hwmon/gxp-fan-ctrl.c | 362 ++++++++++++++++++ 10 files changed, 564 insertions(+), 19 deletions(-) create mode 100644 Documentation/devicetree/bindings/hwmon/hpe,gxp-fan-ctrl.yaml create mode 100644 Documentation/hwmon/gxp-fan-ctrl.rst create mode 100644 drivers/hwmon/gxp-fan-ctrl.c -- 2.17.1
