Add flexspi0 node at common lsio subsystem. Enable flexspi0 at imx8dxl_evk boards dts. Signed-off-by: Frank Li <Frank.Li@xxxxxxx> --- .../boot/dts/freescale/imx8-ss-lsio.dtsi | 17 ++++++++- arch/arm64/boot/dts/freescale/imx8dxl-evk.dts | 36 +++++++++++++++++++ .../boot/dts/freescale/imx8dxl-ss-lsio.dtsi | 5 +++ 3 files changed, 57 insertions(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi index 6446e6df7a9a..1f3d225e64ec 100644 --- a/arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi @@ -11,7 +11,8 @@ lsio_subsys: bus@5d000000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; - ranges = <0x5d000000 0x0 0x5d000000 0x1000000>; + ranges = <0x5d000000 0x0 0x5d000000 0x1000000>, + <0x08000000 0x0 0x08000000 0x10000000>; lsio_mem_clk: clock-lsio-mem { compatible = "fixed-clock"; @@ -107,6 +108,20 @@ lsio_gpio7: gpio@5d0f0000 { power-domains = <&pd IMX_SC_R_GPIO_7>; }; + flexspi0: spi@5d120000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "nxp,imx8qxp-fspi"; + reg = <0x5d120000 0x10000>, <0x08000000 0x10000000>; + reg-names = "fspi_base", "fspi_mmap"; + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX_SC_R_FSPI_0 IMX_SC_PM_CLK_PER>, + <&clk IMX_SC_R_FSPI_0 IMX_SC_PM_CLK_PER>; + clock-names = "fspi", "fspi_en"; + power-domains = <&pd IMX_SC_R_FSPI_0>; + status = "disabled"; + }; + lsio_mu0: mailbox@5d1b0000 { reg = <0x5d1b0000 0x10000>; interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts index 11b1ff90c06d..f8d416f7fd92 100644 --- a/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts @@ -181,6 +181,23 @@ vddio1: vddio-regulator { }; }; +&flexspi0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexspi0>; + nxp,fspi-dll-slvdly = <4>; + status = "okay"; + + mt35xu512aba0: flash@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + spi-max-frequency = <133000000>; + spi-tx-bus-width = <8>; + spi-rx-bus-width = <8>; + }; +}; + &i2c2 { #address-cells = <1>; #size-cells = <0>; @@ -386,6 +403,25 @@ IMX8DXL_ENET1_RGMII_TX_CTL_CONN_EQOS_RGMII_TX_CTL 0x06000020 >; }; + pinctrl_flexspi0: flexspi0grp { + fsl,pins = < + IMX8DXL_QSPI0A_DATA0_LSIO_QSPI0A_DATA0 0x06000021 + IMX8DXL_QSPI0A_DATA1_LSIO_QSPI0A_DATA1 0x06000021 + IMX8DXL_QSPI0A_DATA2_LSIO_QSPI0A_DATA2 0x06000021 + IMX8DXL_QSPI0A_DATA3_LSIO_QSPI0A_DATA3 0x06000021 + IMX8DXL_QSPI0A_DQS_LSIO_QSPI0A_DQS 0x06000021 + IMX8DXL_QSPI0A_SS0_B_LSIO_QSPI0A_SS0_B 0x06000021 + IMX8DXL_QSPI0A_SCLK_LSIO_QSPI0A_SCLK 0x06000021 + IMX8DXL_QSPI0B_SCLK_LSIO_QSPI0B_SCLK 0x06000021 + IMX8DXL_QSPI0B_DATA0_LSIO_QSPI0B_DATA0 0x06000021 + IMX8DXL_QSPI0B_DATA1_LSIO_QSPI0B_DATA1 0x06000021 + IMX8DXL_QSPI0B_DATA2_LSIO_QSPI0B_DATA2 0x06000021 + IMX8DXL_QSPI0B_DATA3_LSIO_QSPI0B_DATA3 0x06000021 + IMX8DXL_QSPI0B_DQS_LSIO_QSPI0B_DQS 0x06000021 + IMX8DXL_QSPI0B_SS0_B_LSIO_QSPI0B_SS0_B 0x06000021 + >; + }; + pinctrl_fec1: fec1grp { fsl,pins = < IMX8DXL_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB0_PAD 0x000014a0 diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-ss-lsio.dtsi b/arch/arm64/boot/dts/freescale/imx8dxl-ss-lsio.dtsi index 815bd987b09b..85e6131ec406 100644 --- a/arch/arm64/boot/dts/freescale/imx8dxl-ss-lsio.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8dxl-ss-lsio.dtsi @@ -3,6 +3,11 @@ * Copyright 2019~2020, 2022 NXP */ +&flexspi0 { + compatible = "nxp,imx8dxl-fspi"; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; +}; + &lsio_gpio0 { compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio"; interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; -- 2.34.1